These are so neat! I got one for each of my girls and they are just in awe of them! Out of all the gifts they received for Christmas this one by far was a hit! Very much recommended! Don't know about how long the batteries will last though we haven't had them for long enough to know but I do wish it was just a plug in instead of batteries....... that's the only reason I gave it 4 stars instead of 5. Overall very neat! :-D
Showing posts with label led driving lamps. Show all posts
Showing posts with label led driving lamps. Show all posts
Buy Wall Eye - 12 volt LED Low-Voltage Landscape Light for Retaining
Posted by
Unknown
on Tuesday, January 20, 2015
Customer Ratings: 
List Price: $49.95
Sale Price: $42.46
Today's Bonus: 15% Off

I'm very pleased with these LED patio lights. They were easy to install, are only 0.5 watts per light, and look great. I highly recommend these lights!
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/966811_10200577305649242_1382759990_o.jpg
List Price: $49.95
Sale Price: $42.46
Today's Bonus: 15% Off
I'm very pleased with these LED patio lights. They were easy to install, are only 0.5 watts per light, and look great. I highly recommend these lights!
Click Here For Most Helpful Customer Reviews >>
My wall is pretty short that i installed these on so it cuts out the full effect of the light but overall i love the way it turned out!https://sphotos-a.xx.fbcdn.net/hphotos-ash3/966811_10200577305649242_1382759990_o.jpg
Discount 1W LED Wall Sconces Decor Fixture Lights Hall Porch Lamp Bulb
Posted by
Unknown
on Sunday, January 11, 2015
Customer Ratings: 
List Price: $60.42
Sale Price: $22.56
Today's Bonus: 63% Off

A solid and heavy light fixture with heavier gauge wiring to LED driver and has quick connect terminals as compared to less expensive fixtures of this type. Works on 110 VAC and light output is fantastic for 1 watt. BUT, the light I received is DIFFERENT from the PHOTOGRAPH! The light shipped does not have a front lens as pictured and only shines light from the each of the four (4) sides with no light forward from the "front lens" as pictured in the front cover. The aluminum cover and body is solid metal with an acrylic or glass lens that diffuses the LED light to the sides only. Based upon the photograph, it appears light should shine from a round hole or lens in the front also? The fixture I received has a solid aluminum front cover with absolutely no round hole in front as pictured. Wrong item or incorrect image?
List Price: $60.42
Sale Price: $22.56
Today's Bonus: 63% Off
A solid and heavy light fixture with heavier gauge wiring to LED driver and has quick connect terminals as compared to less expensive fixtures of this type. Works on 110 VAC and light output is fantastic for 1 watt. BUT, the light I received is DIFFERENT from the PHOTOGRAPH! The light shipped does not have a front lens as pictured and only shines light from the each of the four (4) sides with no light forward from the "front lens" as pictured in the front cover. The aluminum cover and body is solid metal with an acrylic or glass lens that diffuses the LED light to the sides only. Based upon the photograph, it appears light should shine from a round hole or lens in the front also? The fixture I received has a solid aluminum front cover with absolutely no round hole in front as pictured. Wrong item or incorrect image?
Review of Broan 744 70 CFM Recessed 75 Watt Bulb Fan/Light
Posted by
Unknown
on Tuesday, January 6, 2015
Customer Ratings: 
List Price: $117.53
Sale Price: $82.61
Today's Bonus: 30% Off

We used this light/exhaust fan to replace a recessed light above our shower. Home builder didn't install an exhaust fan in the bathroom because it wasn't required by code. This product the perfect solution for removing the steam from our shower. I installed it myself after removing the old recessed light. I had to cut the existing hole in the ceiling drywall @ 1/2" wider to fit the light in the same location but the trim baffle covered this up so no drywall repair was necessary. The only reason I had to do this is that the exhaust duct can't be mounted directly against the joist since you need room to clamp the exhaust hose onto the fan. (Design-wise, placing the fan and exhaust duct at the end of the unit seems to be the most efficient use of space.) The unit is quiet and removes the steam from our shower so we no longer have damp walls after using the shower. I highly recommend this product! Also got a good deal at Amazon (@ $15-20 less than Lowes or Home Depot.)
I removed the existing recessed light and replaced it with the Broan. It fit in perfectly in the existing hole and the ability to mark and install the nails before you slide the extendable arms on them was a huge plus since I was close to the edge of the attic making it almost impossible to install if I had to place the unit in position first. I hooked up the vent pipe and existing electricity line (switch will run fan and light together) and it worked great without any breaker tripping.
I had to pay extra for other accessories to make it work and have it up to code. It adds $75 to the cost, but I got a great price for the Broan in Amazon and the total was $155. Here's what you need to add:
GFCI breaker for the breaker box. It eliminated the need to cut holes and install the GFCI switch in the bathroom.
PAR30L Halogen light (75W).
Insulated exhaust tube.
Tee to install tube to existing exhaust tube (I didn't have the ability to install a new exit hole in the side of the house which is better to do, and cheaper).
Of course you need your usual tools like a hammer, cutter, nails, duct tape, pliers.
If you want a quiet fan and cannot access your attic, this fan is recommended. However, if you want quiet and your attic is accessible, I recommend spending the additional time/money installing an inline (remote/attic mounted) ventilation fan such as Panasonic FV-10NLF1 WhisperLine In-Line Ventilation Fan for Single or Multiple Inlets to minimize the noise. (Note that this small inline fan exhausts twice as much air as the Broan 744.) A 5-10-15-30 minute timer (such as Woods 59007 Decora Style 30-15-10-5 Minute Preset Wall Switch Timer, White, 30-Minute) to control either fan is a luxury you can't afford to be without...
I purchased one of these from Amazon and also had a brick and mortar store price match amazon since at the last minute I decided to install 2 fans. I mention this, because Amazon has the best price as of me writing this review for this product.
My house was build in 1985, and I was installing 2 fans on the upper floor bathrooms. I installed them by utilizing the attic crawl space to accomplish this. I only mention this, because somewhere along the line I read a review somewhere that made it seem like this unit could be installed from inside the bathroom. Maybe it can, but you will have to do some extensive drywall repair if you do so. So my review is based solely on my experience with my exact install.
Other than the fan it self, you will need a 4 inch ducting tube to route the air to a roof air vent in your attic. I also purchased a role of foil tape, as duct tape will get dry and brittle in time. The foil tape is used to attach the 4" ducting tube to the 4" outlet on the Broan 744. I also purchased 14 / 3 wire to power my Broan 744 from an existing Fan Light in my bathroom. And a GFCI breaker for my power box in my garage.
Since the Broan 744 was an additional fan/light for my bathroom, I got my power source from a fan/light that is already in my bathroom that is positioned over the toilet. I installed my Broan 744 over my tub. I purchased electrical wire that is 14/3 wire. Meaning, 3 wires and 1 ground. For my application, I am essentially running my fan in series which means I'm using my new wire and tapping into the exact same wires in the fan that is already installed into my bathroom and then leading that wire over to my new Broan 744. I have 1 light switch in my bathroom that controls the light and one switch that controls the fan. Wiring it like this allows for both fans and lights to work in the exact same way. Fan switch turns on both fans, light switch turns on both lights.
For me the wiring went like this.
Existing wiring in house / Wires coming out of Broan 744
Copper Ground to Green screw mounted in case ( you can't miss it )
Red to Red (this is for the light)
White to White ( this is the neutral)
Black to Blue ( this is for the fan)
I measured and located where I wanted to install my Broan 744. I put a little mark on the ceiling and then used a wire coat hanger to push it straight through the ceiling so I could find it in the attic. I have spray in insulation, so it's a bit of a chore to clear it all out to prepare your working are. I located my coat hangers and determined that I could use the space provided as I didn't have any issues with studs in the ceiling.
You will need to cut a 6 1/2 inch hole for your Broan 744. I am taking all the guess work out of it for you, if you cut a good 6 1/2 inch hole you will be happy with your install. There is a brown piece of cardboard that is in the box that is designed for new construction purposes as it blocks the hole so that nothing gets in the fan/light if the spray texture or paint. That templet is 6 1/2 inches around I traced that onto a new piece of cardboard and cut that out and then used my 6 1/2 inch templet I created to trace circles on the ceiling to signify where I needed to cut. I used a plain old drywall saw that I bought at brick and mortar store for $6. And it worked perfectly. I was able to saw a perfect circle following the lines I drew on the ceiling. So have confidence that a plain old drywall saw will work perfectly fine.
Some reviewers complain about a noisy or rattling fan. The instructions state to crimp the slide channels once it's installed. I'm gonna teach you a trick. put the support arms into the slide channels before you crawl into your attic. Use a big screwdriver to crimp the channels down on the support arms. It will make it tough to slide the support arms out in order to position it, but it's not impossible to move them and you'll eliminate any possible rattling noise that the support arms could possibly make. I had a roof about 2 feet over my head where I was installing, so crimping the slide channels while laying in insulation and not trying to fall through the ceiling was going to be a major chore. I highly recommend crimping it before you take it up to the attic.
The instructions call for a 1/8" gap between the Broan 744 and the drywall. I accomplished this by taking a paint mixing stick and cutting it into 4 pieces. I positioned the Broan 744 over the 6 1/2 inch hole and and then gently lifted each corner and slid the paint stick under it. It is now 1/8 inch above the drywall ceiling. I then extended the support arms out until they touched the ceiling studs and used drywall screws to hold the support arms to the studs. once it was supported, I slid the paint sticks out and wallah, it was hovering 1/8 inch above the drywall ceiling. This keeps the fan motor from vibrating on the ceiling.
I purchased PAR30 bulbs and discovered I really need PAR30L bulbs (for wet climates). A short or medium neck bulb will work, but I recommend a "long neck" PAR30L bulb, it works better and in my opinion, allows more air to be sucked out. I mention this, because I believe the "long neck" bulb allows the fan to work at peak performance and it's not really covered anywhere that I read.
To install over a tub, the easiest fix to make it "legal" and completely safe is to install a new breaker in your power box. You need a GFCI breaker. Every power box is a little different so I won't go into details very much. But if you pop out your breaker and take it to a place that sells breakers and show them what you have and tell them you need the GFCI version, they should be able to help you out.
I have a couple pictures I'll add to the pictures with some notes if it helps anyone.
It's really not all that tough to do, it does take time but the reward is great once you have completed this project. Also, don't forget to turn off your power when doing any wiring. My review isn't meant as the "how to install" it just covers some tips and answers the questions I had prior to installing this in my own house.
I rated this product 4 stars and not 5 stars simply because the instructions could be a little more detailed. The product itself is a 5 star product based on what you're buying 1.5 sones, 70 cfm. Obviously there are better fan/lights out there, but not at this price. The product does work great and it really lights up the shower. Thanks to the light, I can definitely see that I need to eat a little healthier and probably do a sit up or 500.
Good luck.
List Price: $117.53
Sale Price: $82.61
Today's Bonus: 30% Off
We used this light/exhaust fan to replace a recessed light above our shower. Home builder didn't install an exhaust fan in the bathroom because it wasn't required by code. This product the perfect solution for removing the steam from our shower. I installed it myself after removing the old recessed light. I had to cut the existing hole in the ceiling drywall @ 1/2" wider to fit the light in the same location but the trim baffle covered this up so no drywall repair was necessary. The only reason I had to do this is that the exhaust duct can't be mounted directly against the joist since you need room to clamp the exhaust hose onto the fan. (Design-wise, placing the fan and exhaust duct at the end of the unit seems to be the most efficient use of space.) The unit is quiet and removes the steam from our shower so we no longer have damp walls after using the shower. I highly recommend this product! Also got a good deal at Amazon (@ $15-20 less than Lowes or Home Depot.)
Click Here For Most Helpful Customer Reviews >>
This product greatly improved the bathroom feel after you get out of the shower. It feels drier and there's less steam on the mirror.I removed the existing recessed light and replaced it with the Broan. It fit in perfectly in the existing hole and the ability to mark and install the nails before you slide the extendable arms on them was a huge plus since I was close to the edge of the attic making it almost impossible to install if I had to place the unit in position first. I hooked up the vent pipe and existing electricity line (switch will run fan and light together) and it worked great without any breaker tripping.
I had to pay extra for other accessories to make it work and have it up to code. It adds $75 to the cost, but I got a great price for the Broan in Amazon and the total was $155. Here's what you need to add:
GFCI breaker for the breaker box. It eliminated the need to cut holes and install the GFCI switch in the bathroom.
PAR30L Halogen light (75W).
Insulated exhaust tube.
Tee to install tube to existing exhaust tube (I didn't have the ability to install a new exit hole in the side of the house which is better to do, and cheaper).
Of course you need your usual tools like a hammer, cutter, nails, duct tape, pliers.
Best Deals for Broan 744 70 CFM Recessed 75 Watt Bulb Fan/Light
I have installed 6 of these light/fans in my new home. They are generally high quality but quite noisy. 1.5 sones was the quietest rating available of any ceiling-mounted fan at the time of purchase. The only component of these fan/lights that is not of the highest quality is the reflector which is made of plastic. The use of compact fluorescent lamps will minimize potential heat damage/discoloration to the reflector.If you want a quiet fan and cannot access your attic, this fan is recommended. However, if you want quiet and your attic is accessible, I recommend spending the additional time/money installing an inline (remote/attic mounted) ventilation fan such as Panasonic FV-10NLF1 WhisperLine In-Line Ventilation Fan for Single or Multiple Inlets to minimize the noise. (Note that this small inline fan exhausts twice as much air as the Broan 744.) A 5-10-15-30 minute timer (such as Woods 59007 Decora Style 30-15-10-5 Minute Preset Wall Switch Timer, White, 30-Minute) to control either fan is a luxury you can't afford to be without...
Honest reviews on Broan 744 70 CFM Recessed 75 Watt Bulb Fan/Light
I read a lot of reviews about this Broan 744. I'm going to base my review on the questions I had and knowledge I gained from installing this exact product.I purchased one of these from Amazon and also had a brick and mortar store price match amazon since at the last minute I decided to install 2 fans. I mention this, because Amazon has the best price as of me writing this review for this product.
My house was build in 1985, and I was installing 2 fans on the upper floor bathrooms. I installed them by utilizing the attic crawl space to accomplish this. I only mention this, because somewhere along the line I read a review somewhere that made it seem like this unit could be installed from inside the bathroom. Maybe it can, but you will have to do some extensive drywall repair if you do so. So my review is based solely on my experience with my exact install.
Other than the fan it self, you will need a 4 inch ducting tube to route the air to a roof air vent in your attic. I also purchased a role of foil tape, as duct tape will get dry and brittle in time. The foil tape is used to attach the 4" ducting tube to the 4" outlet on the Broan 744. I also purchased 14 / 3 wire to power my Broan 744 from an existing Fan Light in my bathroom. And a GFCI breaker for my power box in my garage.
Since the Broan 744 was an additional fan/light for my bathroom, I got my power source from a fan/light that is already in my bathroom that is positioned over the toilet. I installed my Broan 744 over my tub. I purchased electrical wire that is 14/3 wire. Meaning, 3 wires and 1 ground. For my application, I am essentially running my fan in series which means I'm using my new wire and tapping into the exact same wires in the fan that is already installed into my bathroom and then leading that wire over to my new Broan 744. I have 1 light switch in my bathroom that controls the light and one switch that controls the fan. Wiring it like this allows for both fans and lights to work in the exact same way. Fan switch turns on both fans, light switch turns on both lights.
For me the wiring went like this.
Existing wiring in house / Wires coming out of Broan 744
Copper Ground to Green screw mounted in case ( you can't miss it )
Red to Red (this is for the light)
White to White ( this is the neutral)
Black to Blue ( this is for the fan)
I measured and located where I wanted to install my Broan 744. I put a little mark on the ceiling and then used a wire coat hanger to push it straight through the ceiling so I could find it in the attic. I have spray in insulation, so it's a bit of a chore to clear it all out to prepare your working are. I located my coat hangers and determined that I could use the space provided as I didn't have any issues with studs in the ceiling.
You will need to cut a 6 1/2 inch hole for your Broan 744. I am taking all the guess work out of it for you, if you cut a good 6 1/2 inch hole you will be happy with your install. There is a brown piece of cardboard that is in the box that is designed for new construction purposes as it blocks the hole so that nothing gets in the fan/light if the spray texture or paint. That templet is 6 1/2 inches around I traced that onto a new piece of cardboard and cut that out and then used my 6 1/2 inch templet I created to trace circles on the ceiling to signify where I needed to cut. I used a plain old drywall saw that I bought at brick and mortar store for $6. And it worked perfectly. I was able to saw a perfect circle following the lines I drew on the ceiling. So have confidence that a plain old drywall saw will work perfectly fine.
Some reviewers complain about a noisy or rattling fan. The instructions state to crimp the slide channels once it's installed. I'm gonna teach you a trick. put the support arms into the slide channels before you crawl into your attic. Use a big screwdriver to crimp the channels down on the support arms. It will make it tough to slide the support arms out in order to position it, but it's not impossible to move them and you'll eliminate any possible rattling noise that the support arms could possibly make. I had a roof about 2 feet over my head where I was installing, so crimping the slide channels while laying in insulation and not trying to fall through the ceiling was going to be a major chore. I highly recommend crimping it before you take it up to the attic.
The instructions call for a 1/8" gap between the Broan 744 and the drywall. I accomplished this by taking a paint mixing stick and cutting it into 4 pieces. I positioned the Broan 744 over the 6 1/2 inch hole and and then gently lifted each corner and slid the paint stick under it. It is now 1/8 inch above the drywall ceiling. I then extended the support arms out until they touched the ceiling studs and used drywall screws to hold the support arms to the studs. once it was supported, I slid the paint sticks out and wallah, it was hovering 1/8 inch above the drywall ceiling. This keeps the fan motor from vibrating on the ceiling.
I purchased PAR30 bulbs and discovered I really need PAR30L bulbs (for wet climates). A short or medium neck bulb will work, but I recommend a "long neck" PAR30L bulb, it works better and in my opinion, allows more air to be sucked out. I mention this, because I believe the "long neck" bulb allows the fan to work at peak performance and it's not really covered anywhere that I read.
To install over a tub, the easiest fix to make it "legal" and completely safe is to install a new breaker in your power box. You need a GFCI breaker. Every power box is a little different so I won't go into details very much. But if you pop out your breaker and take it to a place that sells breakers and show them what you have and tell them you need the GFCI version, they should be able to help you out.
I have a couple pictures I'll add to the pictures with some notes if it helps anyone.
It's really not all that tough to do, it does take time but the reward is great once you have completed this project. Also, don't forget to turn off your power when doing any wiring. My review isn't meant as the "how to install" it just covers some tips and answers the questions I had prior to installing this in my own house.
I rated this product 4 stars and not 5 stars simply because the instructions could be a little more detailed. The product itself is a 5 star product based on what you're buying 1.5 sones, 70 cfm. Obviously there are better fan/lights out there, but not at this price. The product does work great and it really lights up the shower. Thanks to the light, I can definitely see that I need to eat a little healthier and probably do a sit up or 500.
Good luck.
Find helpful customer reviews and review ratings for Broan 744 70 CFM Recessed 75 Watt Bulb Fan/Light
I found these on the web and then found them at a big-box store. The design is a great way to add an exhaust fan without taking up so much ceiling real estate, plus add in recessed lighting.Cheap The Container Store Eco-i-Lite LED Headlight Silver
Posted by
Unknown
on Sunday, December 28, 2014
My wife picked up one of these last year. We clean our barn in the evening and the lighting in the paddocks isn't great. Her light provides exceptional lighting and due to the rechargeable nature, no replacement batteries and it always seems at full intensity. My "battery operated" ones require frequent battery changes. I tried to locate one locally, but finally ordered one here so I had one also.
Click Here For Most Helpful Customer Reviews >>
Love this headlight. I've used them for years and was thrilled to find it on Amazon. They are great for reading in bed and for any chore around that house that needs two hands. I always keep a couple on hand.Best Deals for The Container Store Eco-i-Lite LED Headlight Silver
I bought this head lamp two years ago so I can use it to barbeque in the winter. I love that the whole headlamp clicks easily into the charger. I can just grab it out of the charger and it is ready. No batteries to buy and replace. That is the best part. But I had to replace this headlamp because the thin plastic teeth that hold the headlamp to the charger broke off. I wanted to replace only the charger but couldn't. I bought a whole new headlamp.Buy Mighty Bright Clip-On Black Book Reading Light
Posted by
Unknown
on Thursday, December 25, 2014
I got this for my mom for Christmas, as it was on her wish list. I had looked for some others, but this one seemed to have the best features. I was surprised when I got this huge box in the mail. Then I discovered that it was as small as I thought it was. The light arm turns left and right, so you can get a good angle from the light. Also, the whole thing folds up, so it would be easy to travel with. The only thing I thought when I saw my mom using it is that the clip is pretty bulky, so I'm not sure how this would work with a paperback. All in all, I think this light was a great buy and it certainly has made reading much easier on my mom, who was having trouble at night due to bad lighting.
Cons: Batteries killed the light after about 3 years
I really liked this but the batteries got coroid. Not sure why but I got about 3 years of use out of it which is pretty good for the price. I am buying another one... so, I liked it enough that I am going to get another.
Click Here For Most Helpful Customer Reviews >>
Pros: Flexible, small, rotating light.Cons: Batteries killed the light after about 3 years
I really liked this but the batteries got coroid. Not sure why but I got about 3 years of use out of it which is pretty good for the price. I am buying another one... so, I liked it enough that I am going to get another.
Best Deals for Mighty Bright Clip-On Black Book Reading Light
I am pleased with this product, but I think the cost of the replacement bulbs is rather high. I bought this to replace a very similar one that I had bought previously at a Dollar Store!Honest reviews on Mighty Bright Clip-On Black Book Reading Light
Great book light for reading in bed late at night when you don't want to disturb others around you. Or using an e-reader without a backlight. Puts out the right amount of light. I use the batteries in it but you can get the a/c adapter if you like. It's portable and small. Works like a charm.Find helpful customer reviews and review ratings for Mighty Bright Clip-On Black Book Reading Light
This light has a nice appearance and a nice clip to hold it in place. I only had it out of the box and turned on for a few minutes when the bulb burned out. I am not sure what to expect next.Discount Tess 30W Replacement LED Light Bulb, 6W, Warm White
Posted by
Unknown
on Monday, December 22, 2014
I ended up purchasing 33 of these Tess LED bulbs because they are well made, come on instantly, and seem to be a perfect replacements for both Florescent tubes (neutral white) and incandescent (warm white) bulbs. All 33 worked perfectly right out of the box. I purchased most of the 6, 7, and 12 watt LED bulbs from Elemental LED because of their reasonable price plus shipping. I only purchased the 6 watt bulbs after the 7 watts were no longer available; however, I can tell little or no difference in the light output of the two, so I would rate the 6 watt bulb as being closer to the equivalent of a 40 watt incandescent rather than 30. If they are still available when I need another LED, these bulbs will be my first choice.
Discount Amico 48V White 7 LEDs Bulbs Light Electric Bike Bicycle Lamp
Posted by
Unknown
on Wednesday, December 17, 2014
Cheap proce but a disappointment on amout of light it supplies. i have single led lights athat at better. I'm going to tint the lense red and make it a tail light.
Shipping was fast and packaged fine.
Shipping was fast and packaged fine.
Buy Broan RM503004 Chimney Range Hood, Stainless Steel
Posted by
Unknown
on Saturday, December 6, 2014
Customer Ratings: 
List Price: $625.61
Sale Price: $485.50
Today's Bonus: 22% Off

I bought this unit without being able to see one in person, so I wasn't quite sure what I would be getting. I wanted stainless, but didn't feel like paying $1000+ for a hood. I am happy to say it is a very attractive unit, well built, easy to install, and works reasonably well.
I say reasonably, and I don't have anything to compare it to, so take this with a grain of salt, because at the lower speed settings, it will not draw air/steam from the front burners of the stove. When set to high speed, it does a good job, and does direct everything coming off the stove top up the flue.
The stainless is relatively easy to clean, but the top of the hood will get greasy if the fan isn't on and you are cooking with oil. The lights are nice and bright, and the fan isn't nearly as loud as some of the commercial units, but it doesn't draw as well either. Overall this is a good unit at a great price for someone looking to spice up the look of their kitchen without breaking the bank.
I'm a fairly big DIYer, so I would rate the install as a difficulty of 5-6 on a 1-10 scale. Having the electrical and other measurements for cabinets, range, etc. before hand is a must and also do some research, check youtube, google, ask friends and professionals questions and it will make your efforts less frustrating.
As for the operation of the unit it works well, the blower fan is louder on higher setting than many more expensive units, it does move and vent the air well. I'm recycling the air through the provided charcoal filters. If you cook a lot I would suggest venting to the outdoors. If you are replacing a unit with this use the outdoor vent. My only cosmetic con comment would be the white plastic cover for the switches seems a little dingy compared to the rest of the unit.
I'm no professional chef so this unit works well for my needs and will be a great addition to 90% of homes who need a simple economical range ventilation systems or are looking for a little more eye candy in the kitchen.
unit behind the grease screen after a little searching and it took about 3 hours to install, not including a trip to the store for steel duct, roof boot, etc... This is a good unit at this price, in my opinion.
List Price: $625.61
Sale Price: $485.50
Today's Bonus: 22% Off
I bought this unit without being able to see one in person, so I wasn't quite sure what I would be getting. I wanted stainless, but didn't feel like paying $1000+ for a hood. I am happy to say it is a very attractive unit, well built, easy to install, and works reasonably well.
I say reasonably, and I don't have anything to compare it to, so take this with a grain of salt, because at the lower speed settings, it will not draw air/steam from the front burners of the stove. When set to high speed, it does a good job, and does direct everything coming off the stove top up the flue.
The stainless is relatively easy to clean, but the top of the hood will get greasy if the fan isn't on and you are cooking with oil. The lights are nice and bright, and the fan isn't nearly as loud as some of the commercial units, but it doesn't draw as well either. Overall this is a good unit at a great price for someone looking to spice up the look of their kitchen without breaking the bank.
Click Here For Most Helpful Customer Reviews >>
I purchased this hood to go atop our corner stove/range. The stove/range is our focal point in our kitchen. It's been up for a little over three weeks, and the hood looks spectacular. I also love that it has multiple settings for the fan. Even on low, it's not loud, and it does a good job of sucking up air. I'm definitely pleased with this purchase, and it was the cheapest on Amazon!Best Deals for
I received and installed this unit about six months ago and I'm very pleased with how it performs and its aesthetics.I'm a fairly big DIYer, so I would rate the install as a difficulty of 5-6 on a 1-10 scale. Having the electrical and other measurements for cabinets, range, etc. before hand is a must and also do some research, check youtube, google, ask friends and professionals questions and it will make your efforts less frustrating.
As for the operation of the unit it works well, the blower fan is louder on higher setting than many more expensive units, it does move and vent the air well. I'm recycling the air through the provided charcoal filters. If you cook a lot I would suggest venting to the outdoors. If you are replacing a unit with this use the outdoor vent. My only cosmetic con comment would be the white plastic cover for the switches seems a little dingy compared to the rest of the unit.
I'm no professional chef so this unit works well for my needs and will be a great addition to 90% of homes who need a simple economical range ventilation systems or are looking for a little more eye candy in the kitchen.
Honest reviews on
The idea to purchase this hood came from a vist to Ikea. There is a similar hood there but with FREE 2 day shipping (Prime/Student) Amazon is my first choice if they have what I'm looking for. Broan products are basically ubiquitous being found in bathrooms and kitchens throughout the U.S. therefore I knew that the manufacturing of the item ought to be good. The unit met my expectation in this regard and then some. I had planned to vent through the wall however some of the framing and the location of the plug caused me to have to vent through the roof. If you're upgrading from a standard-style hood you may want to look carefully at what you may have to cut through to get this done, i.e. joists, rafters, ductwork. I found the paperwork inside theunit behind the grease screen after a little searching and it took about 3 hours to install, not including a trip to the store for steel duct, roof boot, etc... This is a good unit at this price, in my opinion.
Find helpful customer reviews and review ratings for
It installed easily (I've never installed one and I was able to do it), looks very attractive, and does the job. Very bright light (good), strong fan on high setting (good), and pretty good construction. I have a nice kitchen and it fits right in. And for the price, it can't be beat.Review of Solar 24 LED Color Changing Butterfly Lights
Posted by
Unknown
on Friday, November 14, 2014
These lights are beautiful. I have eight strings, most along the top of my fence. Three different colors illuminate my back yard along the border as well as in the front bushes. Make sure the solar panel gets plenty of sunlight and you won't be disappointed. One string arrived damaged, but the company was fast in sending a replacement at NO additional charge for shipping. That's the only one to give me trouble. It's night as I write this review, and I'm enjoying the light show visible through my window. I highly recommend these lights. Having owned them for over two months through all kinds of weather shows me how durable they are.
Click Here For Most Helpful Customer Reviews >>
I ordered two of these..The first was great, the second not so great. The second set was Yellowed and looked like a return. Doesn't light. Solar panel was unwrapped like it was used.Best Deals for Solar 24 LED Color Changing Butterfly Lights
Bought these for my patio and they worked well, for a short while! Now they're not working at all. Just found out that I needed to change the rechargeable battery!!!! Working fine now.Honest reviews on Solar 24 LED Color Changing Butterfly Lights
These Color Changing Butterfly Lights are my favorite solar lights and I have a lot of solar light in my garden! They are beautiful!Find helpful customer reviews and review ratings for Solar 24 LED Color Changing Butterfly Lights
these are very pretty and work very well on my deck. i do wish the butterflys would stay on a little better, but they are very pretty,Cheap Philips 374322 250-watt PAR38 Krypton Flood Light Bulb
Posted by
Unknown
on Tuesday, October 28, 2014
These are replacements for the 300-watt standard PAR38 incandescent floodlamps, no longer available locally. The catch is that these higher-efficiency lamps are shorter than the old PAR38 lamps, so do not fit in the ceiling fixtures "as is."
The solution is locally-procured medium-base extenders which permit the assembly to penetrate far enough into the fixture to reach the socket.
Dimension measurements or a trial lamp installation may show a need for an extender for each fixture involved.The order got lost somewhere and it took a long time reaching me. The box was damaged a bit which concerned me about the lightbulbs, but they are usable.
The solution is locally-procured medium-base extenders which permit the assembly to penetrate far enough into the fixture to reach the socket.
Dimension measurements or a trial lamp installation may show a need for an extender for each fixture involved.The order got lost somewhere and it took a long time reaching me. The box was damaged a bit which concerned me about the lightbulbs, but they are usable.
Cheap Westinghouse Lighting 7775200 Soleil Polyurethane Ceiling
Posted by
Unknown
on Thursday, September 18, 2014
Customer Ratings: 
List Price: $63.78
Sale Price: $39.97
Today's Bonus: 37% Off

I bought this to cover the ceiling imprint of a removed square lamp fixture. The square was 18" diameter, so 20" medallion was perfect. I had to enlarge the center hole just a little bit to fit the new light fixture it was easily enlarged with my Dremel-like grinding tool.
Mounted it with double-stick glue strips and Liquid Nails for small projects.
It looks great! Added style to my room.I have used many medallions in installing a ceiling fan or lights. They have ranged from cheap thin plastic that warped when installed all the way to using carved wood. This is by far the best unit I can find on the market. The material is a solid, light very stable polyurethane material that easily fits against the ceiling using a polyurethane caulk adhesive. Painted before installation, this unit is gorgeous as a finished product . All I did was order the size appropriate to the size of the room and bingo! You will enjoy the completed look!
List Price: $63.78
Sale Price: $39.97
Today's Bonus: 37% Off
I bought this to cover the ceiling imprint of a removed square lamp fixture. The square was 18" diameter, so 20" medallion was perfect. I had to enlarge the center hole just a little bit to fit the new light fixture it was easily enlarged with my Dremel-like grinding tool.
Mounted it with double-stick glue strips and Liquid Nails for small projects.
It looks great! Added style to my room.I have used many medallions in installing a ceiling fan or lights. They have ranged from cheap thin plastic that warped when installed all the way to using carved wood. This is by far the best unit I can find on the market. The material is a solid, light very stable polyurethane material that easily fits against the ceiling using a polyurethane caulk adhesive. Painted before installation, this unit is gorgeous as a finished product . All I did was order the size appropriate to the size of the room and bingo! You will enjoy the completed look!
Petzl E99 PG2 Tikka XP 2 Headlamp Review
Posted by
Unknown
I have three Petzl Tikka XP headlamps and decided to try this one since it claims to be brighter. It definitely is brighter on the normal setting compared with the older XP, however, the claim that the normal setting is brighter than the boost mode on the old XP is not true (at least with the one I got). The boost mode on my old XP is far brighter than the new XP2, although it's nice to have the extra brightness in the normal setting. The red light is readily available by holding the switch down for three seconds. It's a separate lamp rather than a filter like the old unit had. This makes it possible to use the clear diffuser and still have the red light available.
This unit is a bit lighter, the batteries are a little easier to replace, it uses lithium batteries which my old one did not (lighter and longer life), the switch is easier to use and it doesn't have a boost mode, the light is as bright as it gets with the first position on the switch.
The old XP had three settings for brightness (not including the boost mode). This unit has only two, the brightest being somewhat brighter than the brightest on the old XP and the lower setting being equivalent to the lowest setting on the old one. I think I might miss the middle setting, it was the one I used the most.
There is a lot of light bleed through the clear plastic case. I find it irritating at times, like a light is shinning into my eyes. This one is aimed lower so you don't have to adjust it down to hit the path in front of you. Although that sounds like a good thing I found when working with it I sometimes have to manually hold the lamp up to light something that the old XP would have been able to illuminate.
The only really negative change in my opinion is the blueish color of the LED. It's the same blue light you get from almost all LED's. For me the best feature of the old XP was that the LED put out a warm light, more like a quartz lamp than a blue LED.
I like this unit, I'll just use a dab of black paint if the light bleed continues to bother me. I don't mind that it's not as bright as the boost mode on our other XP's though that would have been nice. I would recommend this light to anyone except owners of the previous model. In my opinion it's not a worthy upgrade from the old XP but it is the best one in the line for now.
edited 3-16-10: I thought I should add a note about the light bleed through the bottom of the case. It did become so irritating I had to deal with it. I stretched a strip of black vinyl electrical tape across the bottom and it fixed the problem. No more light in your eyes and the case still opens easily to replace the batteries.
so when I saw they had a new "improved" version out I had
to have it. I use the old version a lot around the house
and as a backup light for caving.
I just got the Tikka XP2 and man am I disappointed.
The clear bottom of the case allows light to bleed down
onto your eyelashes, into your eyes, and onto your glasses
if you're wearing them. Fixed that with some black heavy duty
duct tape and immediately found another boneheaded design
"improvement"- they changed the lens slider from side to side
to an up and down movement. What this does is: The tab that slides
the lens is now in a position to cast a blaze of light down even
worse than the clear case bottom (fixed with more duct tape.
Didn't these folks figure this out before they released the product
or was it considered a design "feature"?
Also, the lens itself is not as good as the lens was in the old unit. This lens
casts a very uneven footprint on both settings compared to the old unit.
Finally, the unit gives a sickening strobe effect to any motion. Try it
for yourself before you send it back. Move your hand in front of your
face and notice the nauseating strobe effect.
Given these flaws, I have to say the old Tikka XP was damn near perfect and
I immediately got online and discovered it's now discontinued. Soooo, after a
little searching I found a place that had ONE left in stock. It's now on its
way to me.
Do not buy this headlamp if you liked the old Tikka XP. Do buy it if you don't
mind light in the wrong places and the stroboscopic effect.
They should not have used the old name "Tikka XP" as part of the name for this
product because in my opinion the two are completely different and the only similarity is that they are both small. Again, what a disappointment. I had hoped I was going to get basically the same unit, just brighter. Instead I got a completely new design that is inferior to the old. But hey, the new one's brighter!
This unit is a bit lighter, the batteries are a little easier to replace, it uses lithium batteries which my old one did not (lighter and longer life), the switch is easier to use and it doesn't have a boost mode, the light is as bright as it gets with the first position on the switch.
The old XP had three settings for brightness (not including the boost mode). This unit has only two, the brightest being somewhat brighter than the brightest on the old XP and the lower setting being equivalent to the lowest setting on the old one. I think I might miss the middle setting, it was the one I used the most.
There is a lot of light bleed through the clear plastic case. I find it irritating at times, like a light is shinning into my eyes. This one is aimed lower so you don't have to adjust it down to hit the path in front of you. Although that sounds like a good thing I found when working with it I sometimes have to manually hold the lamp up to light something that the old XP would have been able to illuminate.
The only really negative change in my opinion is the blueish color of the LED. It's the same blue light you get from almost all LED's. For me the best feature of the old XP was that the LED put out a warm light, more like a quartz lamp than a blue LED.
I like this unit, I'll just use a dab of black paint if the light bleed continues to bother me. I don't mind that it's not as bright as the boost mode on our other XP's though that would have been nice. I would recommend this light to anyone except owners of the previous model. In my opinion it's not a worthy upgrade from the old XP but it is the best one in the line for now.
edited 3-16-10: I thought I should add a note about the light bleed through the bottom of the case. It did become so irritating I had to deal with it. I stretched a strip of black vinyl electrical tape across the bottom and it fixed the problem. No more light in your eyes and the case still opens easily to replace the batteries.
Click Here For Most Helpful Customer Reviews >>
Was skeptical at first, but this headlamp is perfect. I use it for spotting addresses on mailboxes and houses, when I'm out snowplowing. I can see the house addresses and read them clear at 200' even when its snowing. Its very light weight, very brite and the batteries last a long, long time. I'm going on 3 months now with the lithium ones I have in there. Petzl even backs their warranty by 3 years. Can't beat that! Definetly RECOMMEND this product to anyone. Have a nice day!Best Deals for Petzl E99 PG2 Tikka XP 2 Headlamp
I've been using the old Tikka XP for years and loved itso when I saw they had a new "improved" version out I had
to have it. I use the old version a lot around the house
and as a backup light for caving.
I just got the Tikka XP2 and man am I disappointed.
The clear bottom of the case allows light to bleed down
onto your eyelashes, into your eyes, and onto your glasses
if you're wearing them. Fixed that with some black heavy duty
duct tape and immediately found another boneheaded design
"improvement"- they changed the lens slider from side to side
to an up and down movement. What this does is: The tab that slides
the lens is now in a position to cast a blaze of light down even
worse than the clear case bottom (fixed with more duct tape.
Didn't these folks figure this out before they released the product
or was it considered a design "feature"?
Also, the lens itself is not as good as the lens was in the old unit. This lens
casts a very uneven footprint on both settings compared to the old unit.
Finally, the unit gives a sickening strobe effect to any motion. Try it
for yourself before you send it back. Move your hand in front of your
face and notice the nauseating strobe effect.
Given these flaws, I have to say the old Tikka XP was damn near perfect and
I immediately got online and discovered it's now discontinued. Soooo, after a
little searching I found a place that had ONE left in stock. It's now on its
way to me.
Do not buy this headlamp if you liked the old Tikka XP. Do buy it if you don't
mind light in the wrong places and the stroboscopic effect.
They should not have used the old name "Tikka XP" as part of the name for this
product because in my opinion the two are completely different and the only similarity is that they are both small. Again, what a disappointment. I had hoped I was going to get basically the same unit, just brighter. Instead I got a completely new design that is inferior to the old. But hey, the new one's brighter!
Honest reviews on Petzl E99 PG2 Tikka XP 2 Headlamp
I am a predawn runner and log about 40-50 miles per week running. I was researching various headlamps. I read a lot of reviews, watched a lot of you tube videos on headlamp comparisons. I was using the energizer 3 light headlamp prior to purchasing the petzl. Which I do have to say for under $20 that was a very good little lamp for the price. I ran with it for 2 years, but it sisnt give enough light outside of dimly lit streets. I live in the city but do also run along irrigation channels on farmland in the southwest so it can get a little dark in some areas. I narrowed my choice down to the diamond storm or the petzl tikka xp2. Side by side comparrison (mostly you tube videos) lead me to purchase the petzl. I have had the lamp now a few weeks and I have to say I love it! The light is certainly bright enough for my running needs. I only run with the high beam on with the diffuser, but also love the fact the lamp has the red light for night time vision. Haven't used the strobe light yet, but can see where this would be useful for motor vehicles to see you. I also take precautions on the road by wearing a reflective vest, ankle reflective strips and a flashing red light. This seems like a solid made piece of equipment and durable. I haven't found that the light bleeding around the light, as some have complained, to be an issue. I wear a headband in the winter, a visor in the summer with the lamp. The diffuser really does spread the light out quite far, or one could use it without the diffuser and have a more pin-pointed beam. The tilt feature is nice too. The light doesn't giggle when running and the headband is well made and thick. It also has a little S.O.S. whistle built into the band. I love my light and look fwd to many more miles of running in the dark! Hope this helps.Find helpful customer reviews and review ratings for Petzl E99 PG2 Tikka XP 2 Headlamp
Most people consider these head lamps primarily for use outdoors: running, hiking, camping, caving, etc. While I don't doubt this light would be great for all those things, I've actually found it indispensable around the house. It's extremely useful for working on any odd job that would otherwise be poorly lit, like working under the hood of a vehicle, inside a dark cabinet, or doing electrical with the power off. All are much easier with this lamp. It allows your hands to stay free and prevents you from blocking out your only light sources. It's light and comfortable, and can be worn for extended periods. The lamp can be angled to focus where you're looking, and you can use the direct beam for precise work or the diffusion filter for a wider view. The led bulb is bright and gives good battery life. It feels well constructed overall. I'm very happy with this purchase.Buy Multi Color LED Light Base for Centerpieces, Battery Operated,10
Posted by
Unknown
on Tuesday, September 9, 2014
Customer Ratings: 
List Price: $32.00
Sale Price: $27.00
Today's Bonus: 16% Off

I have used this device for four days a week since I purchased it. It works so well. I use it under a large glass vase and it is much more noticeable. There's so many different light functions; you can make it match many themes.
My one complaint is that it switches through colors so quickly on the "rainbow" mode that it is hard to appreciate every single color. Also maybe next time they will make one that looks like candlelight.
Otherwise it's really great and I highly recommend it.
List Price: $32.00
Sale Price: $27.00
Today's Bonus: 16% Off
I have used this device for four days a week since I purchased it. It works so well. I use it under a large glass vase and it is much more noticeable. There's so many different light functions; you can make it match many themes.
My one complaint is that it switches through colors so quickly on the "rainbow" mode that it is hard to appreciate every single color. Also maybe next time they will make one that looks like candlelight.
Otherwise it's really great and I highly recommend it.