It is just a fluorescent tube like any other, and it has been working fine. Don't know why Home Depot by my area doesn't carry this size, and therefore ordering it on line.
Showing posts with label star led lights. Show all posts
Showing posts with label star led lights. Show all posts
GE 10147 - F15T8/WW Straight T8 Fluorescent Tube Light Bulb Review
Posted by
Unknown
on Tuesday, February 24, 2015
Cheap Philips 40-Watt BR30 Halogena Energy Saver Reflector Flood Light
Posted by
Unknown
on Friday, January 16, 2015
I think these bulbs are a great, no compromise alternative to a 65W incandescent indoor flood light. They are rated at a few lumens more than a standard light and when I mixed and matched these with standard 65W bulbs (in a room with multiple recessed lights) neither me nor my wife could see a difference at any dimming level.
I'm seeing a lot of odd reviews claiming these have mercury (they don't), aren't bright (they are), and take time to warm up (absolutely not true) -which make me think that people are confused about the bulb they are reviewing. There are also reviews stating that these burned out quickly -which I can't speak to (having only put them in recently) but they are rated as having long lives, and all bulb lifetimes are statistical averages.
It's fair to say that these bulbs are not nearly as efficient as CFLs. But if you are unsatisfied with the latter, these bulbs offer a significant energy savings (almost 40% less or, looking at it the other way, a 65W bulb uses 63% more electricity than one of these).
My biggest complaint about this product is that I can't buy it in bulk. I'm sure the cost/bulb could be lower if they were packaged in cartons of 10 or more but that doesn't seem to be available.
The Halogena Energy Savers have been the solution to both problems (the LED would probably work for the electronic eye, but are still too expensive for my tastes). In the electronic eye situation, the light fires up, no problem, no lag in warmup time...and no loss of brightness.
For my digital dimmers these bulbs work with the same functionality as incadescents...no flicker/flutter...great dimming range.
As I don't want to replace my digital dimmers with analog, these bulbs with a 30% wattage savings...have been the best solution for my usage.
The bulb light quality is much better then CFL's but not as good as a standard filament incandescent. Overall the difference in light quality between this bulb and an incandescent bulb is not big enough difference to warrant the extra 25 watts of electricity per bulb that a incandescent uses. I am giving this product a 1 star rating for now due to the ridiculously short life span. I bought two lights at the time of purchase and replaced the burn out bulb with a new Philips Halogena bulb, if the new bulbs lasts as long as it should then I will change my rating.
Update:
It's official these bulbs are total junk, the second bulb burnt out a few weeks ago, that's only a little over 3 mouths of life!
Update 2:
I tried again and got burned. I bought two Philips Halogena 40w (60w replacement) bulbs at my local big box hardware store about 6 months ago for some lamps. One of the bulbs burnt out already the other is still going strong so Philips has some spotty quality control issues. I am now only using the GE halogen energy saver bulbs and have had no issues. I would recommend them to anyone as an alternative to the Philips energy saver bulbs, the GE bulbs are much cheaper at your local big box hardware store then they are on amazon
I'm seeing a lot of odd reviews claiming these have mercury (they don't), aren't bright (they are), and take time to warm up (absolutely not true) -which make me think that people are confused about the bulb they are reviewing. There are also reviews stating that these burned out quickly -which I can't speak to (having only put them in recently) but they are rated as having long lives, and all bulb lifetimes are statistical averages.
It's fair to say that these bulbs are not nearly as efficient as CFLs. But if you are unsatisfied with the latter, these bulbs offer a significant energy savings (almost 40% less or, looking at it the other way, a 65W bulb uses 63% more electricity than one of these).
My biggest complaint about this product is that I can't buy it in bulk. I'm sure the cost/bulb could be lower if they were packaged in cartons of 10 or more but that doesn't seem to be available.
Click Here For Most Helpful Customer Reviews >>
Been slowly updating the lighting in my home with more efficient, compact fluorescents, cold cathode compact fluorescents, and LED's. There were two areas were CFL's and CCFL's just plain didn't work. The first, an electronic eye in the hallway. The CFL and CCFL would flicker and give off light at such a frequency that the electronic eye couldn't handle it. The other was with a series of Lutron's digital dimmers (Maestro). These lights fade up and down when you turn them on and off....and every solution of "dimmable" CFL's and CCFL's struggled with these digital dimmers. No matter how much I burned in the bulbs...a double tap on the Maestro (to full on) would put the digital dimmer into a loop....The Halogena Energy Savers have been the solution to both problems (the LED would probably work for the electronic eye, but are still too expensive for my tastes). In the electronic eye situation, the light fires up, no problem, no lag in warmup time...and no loss of brightness.
For my digital dimmers these bulbs work with the same functionality as incadescents...no flicker/flutter...great dimming range.
As I don't want to replace my digital dimmers with analog, these bulbs with a 30% wattage savings...have been the best solution for my usage.
Best Deals for Philips 40-Watt BR30 Halogena Energy Saver Reflector Flood Light
I just replaced the Compact Fluorescent light bulbs I had in the recessed cans in my living room with these Halogena Energy Savers from Philips. What a difference! It is so much brighter in my living room now and The best part is that I can finally dim my lights at night and save energy at the same time! It is a great alternative for those of us who do not like the light quality of Compact Fluorescents, but still want to save energy and help the environment. These are great bulbs from Philips!Honest reviews on Philips 40-Watt BR30 Halogena Energy Saver Reflector Flood Light
I just installed this light in my kitchen which has 2 other dimmable flood lights. The light from this bulb is perhaps a little bluer, but I wouldn't be able to tell without the other two to compare with. They dim very well and save energy (not as much as CFLs but they dim sooooo much better that I'm willing to accept a 30% savings vs. a 70% savings). They are rated to last 1.5 times as long as your average incandescent so if they do as promised, I will consider this to great product. Echoing a comment from another reviewer, my only criticism is I can't buy them in a 4 or 6 pack.Find helpful customer reviews and review ratings for Philips 40-Watt BR30 Halogena Energy Saver Reflector Flood Light
This bulb only last me about a month with 4-6 hours of use a day. That is completely unacceptable, especially for the cost of this bulb. I am using the bulb in a open bottom trim 5" recessed lighting can. I have standard incandescent, GE halogens, GE halogen energy savers, and CFL's in adjacent cans that have been lasting their normal life spans.The bulb light quality is much better then CFL's but not as good as a standard filament incandescent. Overall the difference in light quality between this bulb and an incandescent bulb is not big enough difference to warrant the extra 25 watts of electricity per bulb that a incandescent uses. I am giving this product a 1 star rating for now due to the ridiculously short life span. I bought two lights at the time of purchase and replaced the burn out bulb with a new Philips Halogena bulb, if the new bulbs lasts as long as it should then I will change my rating.
Update:
It's official these bulbs are total junk, the second bulb burnt out a few weeks ago, that's only a little over 3 mouths of life!
Update 2:
I tried again and got burned. I bought two Philips Halogena 40w (60w replacement) bulbs at my local big box hardware store about 6 months ago for some lamps. One of the bulbs burnt out already the other is still going strong so Philips has some spotty quality control issues. I am now only using the GE halogen energy saver bulbs and have had no issues. I would recommend them to anyone as an alternative to the Philips energy saver bulbs, the GE bulbs are much cheaper at your local big box hardware store then they are on amazon
Best Dimmable LED Gu10 8w Spot Recessed Track Spot Light Bulb Down Review
Posted by
Unknown
on Thursday, January 15, 2015
Customer Ratings: 
List Price: $32.99
Sale Price: $13.99
Today's Bonus: 58% Off

I can not give a fifth star yet since longevity is a claim and just put them in today replacing Halogens. Hate GU10's in small close fitting light fixture the bulbs are a real challenge to take out or put in and these require a very tall ladder to reach. Have seldom used this fixture even though we needed the light because of the high heat created by the halogens and I could tell a huge difference in temperature while aiming the lights at art work after installing the LED's. Seem to be as bright at the 10W halogens they replaced.
List Price: $32.99
Sale Price: $13.99
Today's Bonus: 58% Off
I can not give a fifth star yet since longevity is a claim and just put them in today replacing Halogens. Hate GU10's in small close fitting light fixture the bulbs are a real challenge to take out or put in and these require a very tall ladder to reach. Have seldom used this fixture even though we needed the light because of the high heat created by the halogens and I could tell a huge difference in temperature while aiming the lights at art work after installing the LED's. Seem to be as bright at the 10W halogens they replaced.
TorchStar Tower Type LED G4 3200K Warm White Lamp Bulb 13 SMD LED Review
Posted by
Unknown
on Saturday, January 10, 2015
I bought these to replace 10W halogens in my underwater pond lights. They fit my fixtures, the light has reasonably good dispersion, and they are slightly brighter than the halogens they replace. The color, however, is not as warm as I was expecting. I have quite a few 3000K warm white LEDs, both outdoors and indoors. While these LEDs are advertised as 3200K, they look quite a bit cooler. They are OK for use in the pond, but I would not use these for path or garden lighting.
Updating Sept 23 (after about 3 months of use). Dropping the rating down to 2 stars because one of four bulbs has failed with the LEDs on top flashing intermittently.Ordered a couple of these to replace 10W Incandescent bulbs for land lights. The pins are a little long, but they fit perfectly in the Malibu spot lights. They are a little brighter than the 10W incandescent bulb and are VERY close to being a soft white. I actually like these better. I highly recommend purchasing these.
Updating Sept 23 (after about 3 months of use). Dropping the rating down to 2 stars because one of four bulbs has failed with the LEDs on top flashing intermittently.Ordered a couple of these to replace 10W Incandescent bulbs for land lights. The pins are a little long, but they fit perfectly in the Malibu spot lights. They are a little brighter than the 10W incandescent bulb and are VERY close to being a soft white. I actually like these better. I highly recommend purchasing these.
Review of GE 17453 Wireless Motion Sensing LED Spotlight
Posted by
Unknown
on Friday, January 9, 2015
Customer Ratings: 
List Price: $29.99
Sale Price: $19.97
Today's Bonus: 33% Off

My large backyard is open and lit up enough to see where my dogs are except under some mid-sized fir trees where it's very dark. My dogs confronted a racoon there and I couldn't see what was going on.
I installed these motion lights under those trees along the top of the 4 foot tall fence. I pointed the lights angled out towards the yard a bit. Each one lights up an area from the fence to about 12 feet out and about 10 feet wide. I had to trim some lower branches so they wouldn't wave around and trigger the lights.
Now, from the house, I can see my dogs under the trees perfectly well. I'm delighted! I even spotted a raccoon coming into the yard before the dogs did. From the house, the spotlights are a soft glow on the ground... enough to clearly see what's going on but not so bright as to ruin the night time feel of the yard.
The lights trigger on even when the dogs run in front of the trees, which is perfect. They turn off after 30 seconds of no motion. They stay lit while there is motion. They can be re-triggered immediately after turning off too.
They've worked flawlessly for over a year now. I live in Western Washington where it's wet, wet, wet and that hasn't been a problem at all. We had a severe (for us) snow storm last winter (18 inches of snow! horrors! [haha!]) and the whole freeze/thaw wasn't a problem... except the rechargeable batteries didn't last as long.
If you live where there are nasty spiders and such, I'd recommend using caulk to fill in some openings in the plastic of the light's holder. Nobody can take up residence in the inner workings of the light but I sometimes see critters scatter when I twist and remove the main light from its holder. We don't have to worry about black widows and scorpians here. I you do, then wear gloves when you go to change the batteries or goop up the nesting spots on the holder. Don't get me wrong, the light is very well made. They wisely saved on materials by creating a frame instead using solid plastic.
REGARDING BATTERIES: My dogs can come and go as they please thru a doggie door, but get locked in at bedtime, so it's not like they are out there all the time triggering the lights over and over all night long. But they do go out there a fair number of times every night to patrol the perimeter. The batteries last more than a month. I use rechargeable batteries. I now recharge all the batteries once a month. The charger says the batteries are quite low on power but even with that, the spotlights still produce enough light for me to see well. For this frequent type of charging, the brand of rechargeable batteries that has the D size makes me hoppy (wink). Mine for these lights have lasted well over a year (two?) and are still going strong. Each spotlight will take about $15 in rechargeable batteries... but that's cheap compared to replacing them with alk batts once a month. Every time I recharge them the initial cost fades further from my memory.
MORE RE BATTERIES: The common rechargeable batteries (as of sept 2012 anyways) do not hold a charge on their own for very long. That doesn't matter on my fence lights but I just bought another spotlight to put in a little used carport on our primative property far from home. I will probably switch to the "holds 80% of its charge 2 years" brand of batteries for that light. The only hiccup in the plan is, as of today, that brand doesn't sell rechargeable D batteries but instead sells AAs with a D adaptor. So that is what I will do. I don't want to use regular alk batts because those tend to leak in outdoor applications around here. ALL the brands. Even in flashlights left in my truck and RV. I've cried over several of my lovely LED flashlights and lanterns. Stupid alk batts. They don't make 'em like they used to. I've kept a flashlight in my vehicle for over thirty years and just in the last five years or so the batteries leak. I've tried all kinds of the high end brands and they just keep on leaking and leaking... The cost in flashlights and lanterns and radios and FRS radios and... it will be cheaper to buy expensive batteries that don't leak and not have to replace ruined lights and electronics. Oh, and thus far, not a single rechareable battery has leaked and I'm using them all over the place.
But enough about batteries. I only went on and on about them because they are perfect for this spotlight. The spotlight I love.
However:
There seems to be exactly the same product under the trade brand of Dorcy with Amazon Prime shipping included. Price is $17.90 so I'm going to take a chance on it. Net difference including a trip to the big box and sales tax is $3.75. Will update this review if the product conforms to the GE spec.
List Price: $29.99
Sale Price: $19.97
Today's Bonus: 33% Off
My large backyard is open and lit up enough to see where my dogs are except under some mid-sized fir trees where it's very dark. My dogs confronted a racoon there and I couldn't see what was going on.
I installed these motion lights under those trees along the top of the 4 foot tall fence. I pointed the lights angled out towards the yard a bit. Each one lights up an area from the fence to about 12 feet out and about 10 feet wide. I had to trim some lower branches so they wouldn't wave around and trigger the lights.
Now, from the house, I can see my dogs under the trees perfectly well. I'm delighted! I even spotted a raccoon coming into the yard before the dogs did. From the house, the spotlights are a soft glow on the ground... enough to clearly see what's going on but not so bright as to ruin the night time feel of the yard.
The lights trigger on even when the dogs run in front of the trees, which is perfect. They turn off after 30 seconds of no motion. They stay lit while there is motion. They can be re-triggered immediately after turning off too.
They've worked flawlessly for over a year now. I live in Western Washington where it's wet, wet, wet and that hasn't been a problem at all. We had a severe (for us) snow storm last winter (18 inches of snow! horrors! [haha!]) and the whole freeze/thaw wasn't a problem... except the rechargeable batteries didn't last as long.
If you live where there are nasty spiders and such, I'd recommend using caulk to fill in some openings in the plastic of the light's holder. Nobody can take up residence in the inner workings of the light but I sometimes see critters scatter when I twist and remove the main light from its holder. We don't have to worry about black widows and scorpians here. I you do, then wear gloves when you go to change the batteries or goop up the nesting spots on the holder. Don't get me wrong, the light is very well made. They wisely saved on materials by creating a frame instead using solid plastic.
REGARDING BATTERIES: My dogs can come and go as they please thru a doggie door, but get locked in at bedtime, so it's not like they are out there all the time triggering the lights over and over all night long. But they do go out there a fair number of times every night to patrol the perimeter. The batteries last more than a month. I use rechargeable batteries. I now recharge all the batteries once a month. The charger says the batteries are quite low on power but even with that, the spotlights still produce enough light for me to see well. For this frequent type of charging, the brand of rechargeable batteries that has the D size makes me hoppy (wink). Mine for these lights have lasted well over a year (two?) and are still going strong. Each spotlight will take about $15 in rechargeable batteries... but that's cheap compared to replacing them with alk batts once a month. Every time I recharge them the initial cost fades further from my memory.
MORE RE BATTERIES: The common rechargeable batteries (as of sept 2012 anyways) do not hold a charge on their own for very long. That doesn't matter on my fence lights but I just bought another spotlight to put in a little used carport on our primative property far from home. I will probably switch to the "holds 80% of its charge 2 years" brand of batteries for that light. The only hiccup in the plan is, as of today, that brand doesn't sell rechargeable D batteries but instead sells AAs with a D adaptor. So that is what I will do. I don't want to use regular alk batts because those tend to leak in outdoor applications around here. ALL the brands. Even in flashlights left in my truck and RV. I've cried over several of my lovely LED flashlights and lanterns. Stupid alk batts. They don't make 'em like they used to. I've kept a flashlight in my vehicle for over thirty years and just in the last five years or so the batteries leak. I've tried all kinds of the high end brands and they just keep on leaking and leaking... The cost in flashlights and lanterns and radios and FRS radios and... it will be cheaper to buy expensive batteries that don't leak and not have to replace ruined lights and electronics. Oh, and thus far, not a single rechareable battery has leaked and I'm using them all over the place.
But enough about batteries. I only went on and on about them because they are perfect for this spotlight. The spotlight I love.
Click Here For Most Helpful Customer Reviews >>
I knew I wanted a motion sensing light without wires, and Amazon, as usual, came through. The GE 17453 wireless motion sensing LED spotlight is just right for my front walk. Now, I know instantly when someone is approaching. The batteries are easy to slip in, needs no sunlight for recharging (a pain in some of my other lights)and the light is bright. It is completely adjustable. When I ordered a second one for my deck, that feature allowed me to aim the light down the steps, to make navigating steps at night much easier. My cats have also come to understand that if they want in at night, they can turn on the light and wait, and someone will show up to let them in. I could see that this light could have even more uses I have not yet discovered.Best Deals for GE 17453 Wireless Motion Sensing LED Spotlight
This light has good reviews at a lot of sites but it only lasted about 2 weeks for me. We had an overnight shower and the next day I noticed there was moisture in the senser lens. I brought it inside and went into a dark room and it wouldn't come on. I took out the batteries and saw there was some moisture in the unit so I let it dry out, but it still didn't work. I tried replacing the batteries,too. It did make it through the first shower and the unit is supposed to be sealed for weather but not good enough I guess.Honest reviews on GE 17453 Wireless Motion Sensing LED Spotlight
I have two of these lights purchased from a well-known national discount store that is headquartered in Arkansas and sells this exact model number brand new for $19.95. I love Amazon and do thousands of dollars of business with them each year, but I have found that I have to watch the price tags carefully. The big boxes are not going down to cyber shopping without a fight. This product, however, is excellent: quite bright, quick motion sensor, and reasonable shut off time to conserve batteries. I use in closets where the cheap scoundrel of a contractor did not bother to put lights and will get this third one for a pantry. Five star except for price.However:
There seems to be exactly the same product under the trade brand of Dorcy with Amazon Prime shipping included. Price is $17.90 so I'm going to take a chance on it. Net difference including a trip to the big box and sales tax is $3.75. Will update this review if the product conforms to the GE spec.
Find helpful customer reviews and review ratings for GE 17453 Wireless Motion Sensing LED Spotlight
I have one of these outdoors over a porch stairs, and it worked perfectly every night for over 3 years on one set of batteries. I can't recommend it enough.G9 4w 110v 27*5050smd Warm White LED Corn Light Bulb Reviews
Posted by
Unknown
on Wednesday, December 31, 2014
I bought these bulbs to replace halogen G9 base bulbs in a fixture that has three lights right next to one another. The color of each of the three bulbs I bought was substantially different making them unusable for my application. They are also too dim to use above a bathroom mirror.
In comparison to the standard halogen G9, these put off very little heat and are much, much more energy efficient.
My orignal review:
Product arrive just as expected another star for amazon on deliveries. About product is nice looks pretty enough and match perfectly with my lumaire where is replaceing 8 40w incandescent, energy saving, I believe are going to be a big, big asset. lighitng is cooler and dimmer than previous incandescents, and some of them are yellower than the rest. Overall I liked them.
Click Here For Most Helpful Customer Reviews >>
These are a great color match to my in-ceiling LED downlighting. They truly are instant-on, which is very nice as well. Note: These are taller than your standard G9 bulb, by 1/2-3/4" so keep that in mind. Of course, if your light is above eye level this will not matter.In comparison to the standard halogen G9, these put off very little heat and are much, much more energy efficient.
Best Deals for G9 4w 110v 27*5050smd Warm White LED Corn Light Bulb
update May 2013: I had to take 1 star off as only 7 months after purchase two units just went off, items had paid off allready though with energy bills$$My orignal review:
Product arrive just as expected another star for amazon on deliveries. About product is nice looks pretty enough and match perfectly with my lumaire where is replaceing 8 40w incandescent, energy saving, I believe are going to be a big, big asset. lighitng is cooler and dimmer than previous incandescents, and some of them are yellower than the rest. Overall I liked them.
Honest reviews on G9 4w 110v 27*5050smd Warm White LED Corn Light Bulb
Bulbs are nice and bright. They a bigger than regular halogen bulbs. I replaced 50 w halogen bulbs in my fixture. The brightness is almost the same. One bulb has slightly warmer light then the others. One bulb blew up after a few days. I blame Lutron TGCL-153PH-WH CFL/LED Toggler Dimmer. The light was flickering with this dimmer even it supposed to be used with the leds. I replaced the dimmer with a regular switch and everything is fine so far. They mailed me the replacement bulb promptly. Excellent and fast service.Find helpful customer reviews and review ratings for G9 4w 110v 27*5050smd Warm White LED Corn Light Bulb
The lights are advertised as "warm," but they are considerably cooler than the incandescents I am replacing. They give off light like an old style fluorescent tube. Harsh and cool. Additionally, the audible hum is significant . The price is low compared to similar bulbs.Cheap Gama Sonic Baytown 83-Inch Lamp Post and EZ Anchor with 1
Posted by
Unknown
on Tuesday, November 25, 2014
This lamp post comes in 4 sections which screw into collars to reach the full height. When assembled snugly each section is a few degrees off of straight with the prior section. Noticeable but not horrific. Also the four inch cross pieces that jut out of the head assembly are not parallel to the ground. Again noticeable but not outrageous.
The light itself is adequate and lasts well into the night.
I would recommend this lamp with cautions.
1) its BADLY CROOKED! no matter how you assemble it, the post is NEVER straight. i will have to buy some vine plants and hopefully it wraps around it and no one will notice that it leans.
2) the nut that holds the light fixture to the base becomes loose, so you have to open it up and tighten it. not so bad, but kind of annoying.
3) its just cheaply made. with it being 140 or so dollars, you think you would get something that looks good, but its just crappy metal with cheap spray paint on it.
The light itself is adequate and lasts well into the night.
I would recommend this lamp with cautions.
Click Here For Most Helpful Customer Reviews >>
construction workers removed an old lamp post from our front yard and never put it back for some reason so I ordered this solar lamp post to replace the old one, not as bright as the old one but it's still better then nothing, and greener so no pollution & don't have to pay extra for the electric bill, and will still work after a power outageBest Deals for Gama Sonic Baytown 83-Inch Lamp Post and EZ Anchor with 1
Great looks and holds up well in weather. Very easy to install. However, brightness is insufficient making the looks and installation irrelevant.Honest reviews on Gama Sonic Baytown 83-Inch Lamp Post and EZ Anchor with 1
the light is pretty bright and it was the height i was looking for but there were some problems with it1) its BADLY CROOKED! no matter how you assemble it, the post is NEVER straight. i will have to buy some vine plants and hopefully it wraps around it and no one will notice that it leans.
2) the nut that holds the light fixture to the base becomes loose, so you have to open it up and tighten it. not so bad, but kind of annoying.
3) its just cheaply made. with it being 140 or so dollars, you think you would get something that looks good, but its just crappy metal with cheap spray paint on it.
Find helpful customer reviews and review ratings for Gama Sonic Baytown 83-Inch Lamp Post and EZ Anchor with 1
Easy to install... Shipping was timely and no issues with missing parts or instructions (like I had previously with HomeDepot.com and paid a higher price). Seller had a great price. The light is brighter than I expected which is a good thing.Review of Lighting EVER Brightest 20 Watt 4 foot T8 LED Tube Lights, 60W
Posted by
Unknown
on Tuesday, November 18, 2014
Customer Ratings: 
List Price: $75.50
Sale Price: Price Unavailable
Today's Bonus: 56% Off

After bypassing the ballasts in the light fixture, we put the LED tubes in. The light the cool-white LED tubes put out is beautiful. I may add a pair of warm white for a slightly warmer mix, but I'm rather happy with the intensity, and area coverage. These lights don't waste light in all directions like the old fluorescent tubes did, which makes it much easier on the eyes. The distance from the lights to the floor is 9 feet, so I can imagin the intensity would be even brighter in a 8 foot high installation. I'm amazed at the quality of light.
These things only sip 17 watts per tube, which means I'll be doing my bit in reducing my carbon footprint. :)
At 50,000 hours of lamp life, these things will be a lot cheaper by the time I have to replace them.
My only gripe is that they did not come with an instruction sheet for installation, but after inspecting the tubes, I found a tiny label which had the wiring diagram affixed to one end of the tube. Look for it, take a picture of the diagram, and print it out for use with installing the tubes.
If you can get over the cost of these tubes, it's well worth the admission price to enjoy great lighting at a reduced operating costs.
I was concerned about how these tubes would perform based on how led bulbs performed, but these really restore my faith in LED lighting.
UPDATE:
LED lighting tends to be a bit directional in nature, so if you'd like to spread the lighting more evenly across the room, just roll the outer tubes between 5 and 10 degrees toward the outside of the fixture, and you'll duplicate more closely the spread you were used to with the old flourescent, but you'll still enjoy much better quality of light. :)
The light is great, brighter than the fluorescents and very consistent. They come on almost instantly to full power and at 17 watts they use less than half the power!
They definitely did take a little work to install and if you aren't comfortable cutting a wire then these aren't for you.
Along those lines, my only dissapointment was that the box didn't include any INSTRUCTIONS for installation and their web site was even less helpful -I posted a request for support asking for instructions and never have heard from them.
Ultimately it didn't matter though. I just cut out the ballast and reconnected the wires. The first one I did took about 10 minutes. The next two, took about 5 minutes each. It's good if you have a couple of wire nuts to join the wires back together safely.
So, if you are at all handy and want some really beautiful light (and a cool conversation piece too) then go for it!
These tubes (at least the current ones, with the grey "Input" marking on one end) are single-ended tubes. A single-ended tube requires a hot line and a neutral line on the same end (and no connection on the other end). A dual-ended tube takes hot on one end and neutral on the other. My fixtures (similar to most fluorescent fixtures) are wired on both ends with shunted lampholders (the little tombstone-shaped plastic holders that the pins slide into and then turn). I had to order non-shunted lampholders (http://www.amazon.com/dp/B00522MPTA) and reconfigure my fixture to get the tubes to work. It's unfortunate that Lighting Ever chose the single-ended configuration, in my opinion, since it complicates wiring for many of us. It also means that if you ever switch to dual-ended LED tubes you'll need to rewire again, otherwise you'll get a nice little explosion and a tripped breaker, since dual-ended tubes have the pins at each end wired together.) It's possible this is a recent change, since other reviews of this product and pointers to wiring diagrams seem to imply that the tubes used to be double-ended. (Here's a diagram of how to wire for different options: .)
The lights take about half a second to come on. They don't flicker on slowly like the old-style fluorescents in all my grade school buildings, but they're slower than incandescents or the rapid-start electronic ballast that we replaced. It's a bit odd to flip the switch and count a beat before the lights come on, but you get used to it. And once they're on they seem to be at full brightness. No warm-up period like fluorescents.
If you're not sure about color, go with the warm white. We sent the cool white ones back and got warm white, which is still not cozy warm like incandescents, but it's ok for our taste. The cool white color isn't as bad as in Joe vs. the Volcano, but it is rather blue.
All that aside, they work well and are a good deal for the price. I've been waiting 10 years for LEDs to become affordable and let us move beyond those unsufferable fluorescents, and it's finally starting to happen. It's good to be green.
-----------------
The extruded aluminum 'tube' is nice and heavy, it gives the impression of being a good heat sink. The array of LEDs are surface mounted onto a long thin single sided PCB that slides into grooves in the aluminum extrusion. Internally the LED board is held a couple of mmoff the internal center surface of the heat sink so they're depending on the circuit boards edge touching the side of the heatsink/tube to conduct away the heat.
The big design problem is the mounting of the power supply. It is a 4" long PCB slid into the 'back' cavity of the tube with a pair of wires routed around the end of the extrusion and soldered to the LED PCB. The wires in one of my units were completely severed because there is nothing to hold the power supply boards from sliding back and forth in the tube, it was probably dropped in shipping at one point and the inertia of the power supply pulled hard enough to cleanly sever both DC supply wires against the sharp end of the extrusion. Worse one of the units made the usual 'click click click' sound of a shorted power supply when turned on, it turns out there is no insulation between the metal aluminum tube and the bottom of the power supply PCB, on this unit there was a little too much solder on some of the component leads and that solder was touching the metal case causing a short on the low voltage side. I stuck a piece of electrical tape over the bottom of the PCB and slid it back in to fix this problem. If you like excitement and decide to install these I would strongly recommend wearing insulated gloves in case any of the high voltage connections happen to touch the case.
I didn't see a UL mark on the units (AC can easily be in direct contact with the metal case and there is no provision to ground the case so they may have trouble getting an agency certification) and there is no indication of an agency certification anywhere on the packaging or docs. Perhaps they shipped me a different product than is listed on Amazon.
Installation
-------------
On the plus side a wiring diagram is included, two in fact, on the minus side neither of them could possibly work. As other reviewers have noted the actual unit is wired to receive power on the two pins on the same side of the tube despite the diagrams. On the fixture/ballast I rewired the tube connectors didn't allow for separate connection of the 2 pins on either side of the tube. If you have 'instant start, shunted' style ballast wiring expect some fun with a dremel or a trip to a h/w store to pick up a new set of unshunted connectors. Installation took way too long due to the plain wrong wiring diagrams included and the need to modify the connectors.
It is telling that the 'QA' sticker is stuck to the wiring diagram (used like tape to hold it wrapped around the unit) rather than the unit itself. The wiring diagram IS a nice looking piece of paper, though for some other unit.
Startup
--------------
The little switching power supply in each tube takes some time to start, less than 1 second for the 4 I installed. This is on par with other switching power supply driven LED's from other vendors.
Quality of light
--------------
The light quality is good and while they call it warm its as warm as any other 3800K LED's -so its not so warm compared to those 'warm' pink fluorescent tubes you can get. However its what I wanted for my utility room. The diffuser they include is appropriate and spreads the very directional light nicely, but not a whole lot. They work great in a fixture that has a diffuser over the tubes.
Summary
--------------
My main problem is the unspeakably poor integration/assembly of the units I received. I think due to the metal construction of the tube any shorts caused by the lack of insulation or mechanical support of the power supplies will likely cause a breaker to trip before actually causing a fire. I would never install one of these in a location where a person could touch the metal casing.
** Turn off power at service panel, and also at light switch. **
The rewiring the 2-tube fixture was pretty simple. I completely disconnected the ballast. Black wire (hot) connected to the side of one "tombstone" that was going to receive the "L" pin. The same side of that tombstone was connected by a short jumper to the other "tombstone" on the side that would receive the "L" pin of the other tube.
The white (neutral) wire got connected to the side of one tombstone that was going to receive the "N" pin, and a short jumper was used to connect that side of the tombstone to the side of the other tombstone that was going to receive the "N" pin from the 2nd tube.
L-to-L and N-to-N means the two tubes are connected in PARALLEL, which is the way they must be connected. Even the lousy included instructions mention that.
The color of the warm-white tubes are a very close match to the warm-white fluorescents we were using. They are somewhat brighter, using only 16W compared to the 32W of the fluorescents they are replacing.
I will be ordering 2 more to replace the other 2 bulbs in the same area.
List Price: $75.50
Sale Price: Price Unavailable
Today's Bonus: 56% Off
After bypassing the ballasts in the light fixture, we put the LED tubes in. The light the cool-white LED tubes put out is beautiful. I may add a pair of warm white for a slightly warmer mix, but I'm rather happy with the intensity, and area coverage. These lights don't waste light in all directions like the old fluorescent tubes did, which makes it much easier on the eyes. The distance from the lights to the floor is 9 feet, so I can imagin the intensity would be even brighter in a 8 foot high installation. I'm amazed at the quality of light.
These things only sip 17 watts per tube, which means I'll be doing my bit in reducing my carbon footprint. :)
At 50,000 hours of lamp life, these things will be a lot cheaper by the time I have to replace them.
My only gripe is that they did not come with an instruction sheet for installation, but after inspecting the tubes, I found a tiny label which had the wiring diagram affixed to one end of the tube. Look for it, take a picture of the diagram, and print it out for use with installing the tubes.
If you can get over the cost of these tubes, it's well worth the admission price to enjoy great lighting at a reduced operating costs.
I was concerned about how these tubes would perform based on how led bulbs performed, but these really restore my faith in LED lighting.
UPDATE:
LED lighting tends to be a bit directional in nature, so if you'd like to spread the lighting more evenly across the room, just roll the outer tubes between 5 and 10 degrees toward the outside of the fixture, and you'll duplicate more closely the spread you were used to with the old flourescent, but you'll still enjoy much better quality of light. :)
Click Here For Most Helpful Customer Reviews >>
I replaced three T8 fluorescents in my home office with these. I started with just one to make sure they worked and that I would be happy with the light. Bottom line -they do and I am!The light is great, brighter than the fluorescents and very consistent. They come on almost instantly to full power and at 17 watts they use less than half the power!
They definitely did take a little work to install and if you aren't comfortable cutting a wire then these aren't for you.
Along those lines, my only dissapointment was that the box didn't include any INSTRUCTIONS for installation and their web site was even less helpful -I posted a request for support asking for instructions and never have heard from them.
Ultimately it didn't matter though. I just cut out the ballast and reconnected the wires. The first one I did took about 10 minutes. The next two, took about 5 minutes each. It's good if you have a couple of wire nuts to join the wires back together safely.
So, if you are at all handy and want some really beautiful light (and a cool conversation piece too) then go for it!
Best Deals for Lighting EVER Brightest 20 Watt 4 foot T8 LED Tube Lights, 60W
I bought these lights partly because we're quite happy with another Lighting Ever LED fixture we installed and because of the good reviews here. Overall the wife and I are happy with them, but they were a bit tricky to get working. Here's a bit of additional information that may be helpful:These tubes (at least the current ones, with the grey "Input" marking on one end) are single-ended tubes. A single-ended tube requires a hot line and a neutral line on the same end (and no connection on the other end). A dual-ended tube takes hot on one end and neutral on the other. My fixtures (similar to most fluorescent fixtures) are wired on both ends with shunted lampholders (the little tombstone-shaped plastic holders that the pins slide into and then turn). I had to order non-shunted lampholders (http://www.amazon.com/dp/B00522MPTA) and reconfigure my fixture to get the tubes to work. It's unfortunate that Lighting Ever chose the single-ended configuration, in my opinion, since it complicates wiring for many of us. It also means that if you ever switch to dual-ended LED tubes you'll need to rewire again, otherwise you'll get a nice little explosion and a tripped breaker, since dual-ended tubes have the pins at each end wired together.) It's possible this is a recent change, since other reviews of this product and pointers to wiring diagrams seem to imply that the tubes used to be double-ended. (Here's a diagram of how to wire for different options: .)
The lights take about half a second to come on. They don't flicker on slowly like the old-style fluorescents in all my grade school buildings, but they're slower than incandescents or the rapid-start electronic ballast that we replaced. It's a bit odd to flip the switch and count a beat before the lights come on, but you get used to it. And once they're on they seem to be at full brightness. No warm-up period like fluorescents.
If you're not sure about color, go with the warm white. We sent the cool white ones back and got warm white, which is still not cozy warm like incandescents, but it's ok for our taste. The cool white color isn't as bad as in Joe vs. the Volcano, but it is rather blue.
All that aside, they work well and are a good deal for the price. I've been waiting 10 years for LEDs to become affordable and let us move beyond those unsufferable fluorescents, and it's finally starting to happen. It's good to be green.
Honest reviews on Lighting EVER Brightest 20 Watt 4 foot T8 LED Tube Lights, 60W
Materials and design-----------------
The extruded aluminum 'tube' is nice and heavy, it gives the impression of being a good heat sink. The array of LEDs are surface mounted onto a long thin single sided PCB that slides into grooves in the aluminum extrusion. Internally the LED board is held a couple of mmoff the internal center surface of the heat sink so they're depending on the circuit boards edge touching the side of the heatsink/tube to conduct away the heat.
The big design problem is the mounting of the power supply. It is a 4" long PCB slid into the 'back' cavity of the tube with a pair of wires routed around the end of the extrusion and soldered to the LED PCB. The wires in one of my units were completely severed because there is nothing to hold the power supply boards from sliding back and forth in the tube, it was probably dropped in shipping at one point and the inertia of the power supply pulled hard enough to cleanly sever both DC supply wires against the sharp end of the extrusion. Worse one of the units made the usual 'click click click' sound of a shorted power supply when turned on, it turns out there is no insulation between the metal aluminum tube and the bottom of the power supply PCB, on this unit there was a little too much solder on some of the component leads and that solder was touching the metal case causing a short on the low voltage side. I stuck a piece of electrical tape over the bottom of the PCB and slid it back in to fix this problem. If you like excitement and decide to install these I would strongly recommend wearing insulated gloves in case any of the high voltage connections happen to touch the case.
I didn't see a UL mark on the units (AC can easily be in direct contact with the metal case and there is no provision to ground the case so they may have trouble getting an agency certification) and there is no indication of an agency certification anywhere on the packaging or docs. Perhaps they shipped me a different product than is listed on Amazon.
Installation
-------------
On the plus side a wiring diagram is included, two in fact, on the minus side neither of them could possibly work. As other reviewers have noted the actual unit is wired to receive power on the two pins on the same side of the tube despite the diagrams. On the fixture/ballast I rewired the tube connectors didn't allow for separate connection of the 2 pins on either side of the tube. If you have 'instant start, shunted' style ballast wiring expect some fun with a dremel or a trip to a h/w store to pick up a new set of unshunted connectors. Installation took way too long due to the plain wrong wiring diagrams included and the need to modify the connectors.
It is telling that the 'QA' sticker is stuck to the wiring diagram (used like tape to hold it wrapped around the unit) rather than the unit itself. The wiring diagram IS a nice looking piece of paper, though for some other unit.
Startup
--------------
The little switching power supply in each tube takes some time to start, less than 1 second for the 4 I installed. This is on par with other switching power supply driven LED's from other vendors.
Quality of light
--------------
The light quality is good and while they call it warm its as warm as any other 3800K LED's -so its not so warm compared to those 'warm' pink fluorescent tubes you can get. However its what I wanted for my utility room. The diffuser they include is appropriate and spreads the very directional light nicely, but not a whole lot. They work great in a fixture that has a diffuser over the tubes.
Summary
--------------
My main problem is the unspeakably poor integration/assembly of the units I received. I think due to the metal construction of the tube any shorts caused by the lack of insulation or mechanical support of the power supplies will likely cause a breaker to trip before actually causing a fire. I would never install one of these in a location where a person could touch the metal casing.
Find helpful customer reviews and review ratings for Lighting EVER Brightest 20 Watt 4 foot T8 LED Tube Lights, 60W
Read all the reviews. Seems like not all the product out there is the exact same. I ordered 2 tubes, and they came packaged nicely. With the warnings i read about on reviews here, i carefully examined the tubes i got. One end was CLEARLY labeled with an "L" and an "N" next to the two pins. I assumed those meant "Load" and "Neutral". Pulling the cap off i saw each pin had it's own wire, though i couldn't quite see where there were heading to. More importantly, taking the other end cap off, I saw there were absolutely no electrical connections to the pins. So therefore, the L & N must refer to Load (hot) and Neutral.** Turn off power at service panel, and also at light switch. **
The rewiring the 2-tube fixture was pretty simple. I completely disconnected the ballast. Black wire (hot) connected to the side of one "tombstone" that was going to receive the "L" pin. The same side of that tombstone was connected by a short jumper to the other "tombstone" on the side that would receive the "L" pin of the other tube.
The white (neutral) wire got connected to the side of one tombstone that was going to receive the "N" pin, and a short jumper was used to connect that side of the tombstone to the side of the other tombstone that was going to receive the "N" pin from the 2nd tube.
L-to-L and N-to-N means the two tubes are connected in PARALLEL, which is the way they must be connected. Even the lousy included instructions mention that.
The color of the warm-white tubes are a very close match to the warm-white fluorescents we were using. They are somewhat brighter, using only 16W compared to the 32W of the fluorescents they are replacing.
I will be ordering 2 more to replace the other 2 bulbs in the same area.
Discount Antiqure Green Solar Spotlight - 3 White LED
Posted by
Unknown
on Sunday, November 16, 2014
CREE 40450 185 Lumens Multi-functional LED Lantern and Torch Reviews
Posted by
Unknown
on Wednesday, November 12, 2014
Customer Ratings: 
List Price: $29.99
Sale Price: $26.86
Today's Bonus: 10% Off

I'm in Haiti, I've been here for 3 months and I've got another 2 months to go. I use the light every night as I'm sleeping in a tent while doing relief work.
The light works great I like the switchable lantern-to-flashlight and I've discovered that if I turn the light part of the way I can direct the lantern light in one direction for reading but still keep the light out of my eyes. The amount of light is great very bright and if you use a plastic grocery bag as a shroud it's great to light the tent for general soft lighting.
The problem with the unit is that the threads on the bottom are too fine/dainty. With the heavy use comes heavy traffic into the battery compartment. The threads are failing. Each time I r/r the batteries I wonder if I will get the bottom screwed back on of it this will be the time it fails completely leaving me with a useless and expensive paperweight in a place where paperweights are completely useless.
This one has a whiter, and much brighter light than the 110 lumens model. The 110 model is also very bright, but with a light more like an incandescent bulb. This one takes 4AA batteries, the 110 takes 3AA. I use the Eneloop brand NiMH batteries and they last for months of regular use on a single charge. I've never tried standard alkaline batts, so I can't comment on their life.
I love how both these lanterns have a loop on the top that allow suspension in tents, cars, etc. The 185 also has a rotating lens that allows it to be used as a nice directional flashlight. Both these models have metal bodies, and seem very well built. They also have a little green LED light that flashes every 5 seconds perfect for finding the unit in the middle of the night.
These lights are both money very well spent. I think I can finally stop looking for the perfect camp lights.
I had bought my first one ( I bought a couple more, sadly enough )
and that first lantern seemed like a really good product. I gave it a rave review, which I have now decided to delete completely.
Here are some of the reasons why. At first opening up the plastic packaging it feels very well built. I had a little trouble closing it up after putting in 4 very highly rated Maha 2400mAh rechargeable batteries. I see a lot of reviewers mention that the bottom is very difficult to screw on without cross threading it. Ha!
It is rather easy to learn how to screw that bottom on perfectly each time. This lantern burns through any and all of the batteries i have tried, in under 12 hours and that is on its on its lowest setting! Now you all know why I got so good at doing that threading perfectly each time. Through a major amount of practice!
Warning!! Do not buy this lantern! It Will Not Burn Anything But Every Battery You Own!! THEY ARE LYING ABOUT ITS BURN RATE!!!
I have a varied small collection of smaller sized lanterns for when I am camping. So I am pretty savvy when it comes to rechargeable high capacity batteries, refresh and recharge cycles, etc. and as a test I have used the highest rated capacity batteries available. I failed. this Lantern...It burned out my 2700mah PowerEx batteries in 12 hours on low. I bought two more of these before I had realized that there is nothing that works any better, so the three of them are all burning through any batteries I have tried. Duracells, Procells, PowerExs Mahas EneloopXXs.
If you buy a Coleman 3AA High-Tech LED Mini Lantern that one lasts an incredible 25 to 35 hours on low on three of these high end batteries that the Cree 185 burns out in 10 maybe 12 hours.
Another good lantern is the Rayovac SP1W3AALN-BA Sportsman 65-Lumens LED Mini Lantern With Batteries. It will last about 2-12 hour nights on low.
But buyers beware this Cree!! How are you going to recharge your batteries when you are in the woods?
But to be fair, after all, it does give off an amazing amount of light. Best light I have seen probably. You cannot look straight at it when it's on because it is so brilliant. And that's on low. It is a spectacular light. But it cannot be called a lantern. It is not usable as a Lantern.
But If you need to have a very brilliant light around when you are out camping that you will use just for an hour here or there, for when you are cooking, or looking for more firewood in the dark, ( I have been there and back. :-) ) then if you have the room for this then throw one in to your pack. But if you take it hiking with you and you think you have a lantern, and you are going to be out for a five day trip or more, you better also throw in your pack hmmm.... About a minimum of 24 to 48 high capacity AA batteries.
My thoughts on this product is that they over designed the light and it just is not useable with AA batteries. Not four. It is just too powerful for their energy design. So stay away from this one and check out the ones I liked the most.
I also bought the warm light Cree, CREE 40426 110 Lumens Bright Light CREE XLamp Warm White Camping LED Lantern
and this one also burns out my batteries quickly. But at least it goes for 16 hours on low and takes only 3 AA's. Lol!!
Anyway, all those other reviews that say it runs for ever or for a very long time, I don't agree with.... I mean I have tried 3 of them. So As another reviewer pointed out, on high you get only 5-7 hours of light! And he's RIGHT.
List Price: $29.99
Sale Price: $26.86
Today's Bonus: 10% Off
I'm in Haiti, I've been here for 3 months and I've got another 2 months to go. I use the light every night as I'm sleeping in a tent while doing relief work.
The light works great I like the switchable lantern-to-flashlight and I've discovered that if I turn the light part of the way I can direct the lantern light in one direction for reading but still keep the light out of my eyes. The amount of light is great very bright and if you use a plastic grocery bag as a shroud it's great to light the tent for general soft lighting.
The problem with the unit is that the threads on the bottom are too fine/dainty. With the heavy use comes heavy traffic into the battery compartment. The threads are failing. Each time I r/r the batteries I wonder if I will get the bottom screwed back on of it this will be the time it fails completely leaving me with a useless and expensive paperweight in a place where paperweights are completely useless.
Click Here For Most Helpful Customer Reviews >>
It's extremely bright for a compact lantern, and when flipping-over the (cree?) emitter to turn it into a flashlight, you get the widest (as well as extremely bright) 'flood area' I've ever seen in a 'flashlight'. The only drawback (and it's minor), is that it's a little 'wide' to be held comfortably as a flashlight for any length of time. That's due to the diameter needed to house 4 AA batteries. But for shorter durations, its fine. Also, unlike its earlier version that did not allow you to 'flip' the emitter (you unscrewed the top to make it into a flashlight), it's light has a few dark spots (when used as a lanten), because it has a support structure that marginally interferes with the light's uniformity in the lantern mode. But for this price (they were selling for twice as much when they first came out), this is a super, multi-functional device. [Follow-up: I wanted to check the drain on the batteries by the flashing LED. And after 4 months, using a digital voltmeter that applied a load, the batteries...never having been used to light the lantern...only the LED...dropped from 1.57 volts to 1.51 volts during that 4 month test. So, you can decide if it's a problem keeping batteries in the unit...based on the above drop in voltage during the 4 month storage test. BTW I did keep an unused comparison battery as a 'control', which by itself, dropped from 1.57 to 1.56 over the same period.]Best Deals for CREE 40450 185 Lumens Multi-functional LED Lantern and Torch
First, this lantern also has a smaller brother (http://www.amazon.com/Small-Package-Bright-Camping-Lantern/dp/B002C5BXGQ/ref=sr_1_1?ie=UTF8&qid=1300380204&sr=8-1) that is also great, albeit with a lower lumens rating (110). I have both, and think they're both awesome.This one has a whiter, and much brighter light than the 110 lumens model. The 110 model is also very bright, but with a light more like an incandescent bulb. This one takes 4AA batteries, the 110 takes 3AA. I use the Eneloop brand NiMH batteries and they last for months of regular use on a single charge. I've never tried standard alkaline batts, so I can't comment on their life.
I love how both these lanterns have a loop on the top that allow suspension in tents, cars, etc. The 185 also has a rotating lens that allows it to be used as a nice directional flashlight. Both these models have metal bodies, and seem very well built. They also have a little green LED light that flashes every 5 seconds perfect for finding the unit in the middle of the night.
These lights are both money very well spent. I think I can finally stop looking for the perfect camp lights.
Honest reviews on CREE 40450 185 Lumens Multi-functional LED Lantern and Torch
This is a great light. Very bright and versatile but there is one flaw and one Lie. The FLAW is the bottom battery compartment cover. It is very fussy to get starter correctly. Be very careful to get it started correctly or you will cross thread it. Mine even when started correctly, will go about two turns then it comes to a catch that have to force it past then it closes all the way. The LIE is the 25 hour battery life. The REAL BATTERY LIFE 5 to 7 hours. I have done many tests using Daracells, EverReadys, and 2700 mah Powerex batteries. The light begins to dim significantly after 5 hours with the Duracells and EverReadys and after 7 hours with the Powerex batteries. I ask others to do some tests and post the results here. If you are going into the back country you will need a new set of batteries for every 5 to 7 Hrs of use.Find helpful customer reviews and review ratings for CREE 40450 185 Lumens Multi-functional LED Lantern and Torch
I had to review this little lantern because of how really excellent I first thought it was.I had bought my first one ( I bought a couple more, sadly enough )
and that first lantern seemed like a really good product. I gave it a rave review, which I have now decided to delete completely.
Here are some of the reasons why. At first opening up the plastic packaging it feels very well built. I had a little trouble closing it up after putting in 4 very highly rated Maha 2400mAh rechargeable batteries. I see a lot of reviewers mention that the bottom is very difficult to screw on without cross threading it. Ha!
It is rather easy to learn how to screw that bottom on perfectly each time. This lantern burns through any and all of the batteries i have tried, in under 12 hours and that is on its on its lowest setting! Now you all know why I got so good at doing that threading perfectly each time. Through a major amount of practice!
Warning!! Do not buy this lantern! It Will Not Burn Anything But Every Battery You Own!! THEY ARE LYING ABOUT ITS BURN RATE!!!
I have a varied small collection of smaller sized lanterns for when I am camping. So I am pretty savvy when it comes to rechargeable high capacity batteries, refresh and recharge cycles, etc. and as a test I have used the highest rated capacity batteries available. I failed. this Lantern...It burned out my 2700mah PowerEx batteries in 12 hours on low. I bought two more of these before I had realized that there is nothing that works any better, so the three of them are all burning through any batteries I have tried. Duracells, Procells, PowerExs Mahas EneloopXXs.
If you buy a Coleman 3AA High-Tech LED Mini Lantern that one lasts an incredible 25 to 35 hours on low on three of these high end batteries that the Cree 185 burns out in 10 maybe 12 hours.
Another good lantern is the Rayovac SP1W3AALN-BA Sportsman 65-Lumens LED Mini Lantern With Batteries. It will last about 2-12 hour nights on low.
But buyers beware this Cree!! How are you going to recharge your batteries when you are in the woods?
But to be fair, after all, it does give off an amazing amount of light. Best light I have seen probably. You cannot look straight at it when it's on because it is so brilliant. And that's on low. It is a spectacular light. But it cannot be called a lantern. It is not usable as a Lantern.
But If you need to have a very brilliant light around when you are out camping that you will use just for an hour here or there, for when you are cooking, or looking for more firewood in the dark, ( I have been there and back. :-) ) then if you have the room for this then throw one in to your pack. But if you take it hiking with you and you think you have a lantern, and you are going to be out for a five day trip or more, you better also throw in your pack hmmm.... About a minimum of 24 to 48 high capacity AA batteries.
My thoughts on this product is that they over designed the light and it just is not useable with AA batteries. Not four. It is just too powerful for their energy design. So stay away from this one and check out the ones I liked the most.
I also bought the warm light Cree, CREE 40426 110 Lumens Bright Light CREE XLamp Warm White Camping LED Lantern
and this one also burns out my batteries quickly. But at least it goes for 16 hours on low and takes only 3 AA's. Lol!!
Anyway, all those other reviews that say it runs for ever or for a very long time, I don't agree with.... I mean I have tried 3 of them. So As another reviewer pointed out, on high you get only 5-7 hours of light! And he's RIGHT.
Reviews of Kovacs P4306-631 19" LED Table Lamp, Chocolate Chrome
Posted by
Unknown
on Sunday, November 9, 2014
Customer Ratings: 
List Price: $267.00
Sale Price: $178.00
Today's Bonus: 33% Off

These are wonderful lamps. We bought a pair to use on our bedside nightstands. The "chocolate chrome" finish is gorgeous and blends in with our dark cherry furniture. Very stylish design. The light color is very pleasant 3000K which is a warmish white. The on/off button lights up when the lamp is off and is a gentle night light, but not so bright it disturbs sleep. Once you press the on button, hold it down for the lamp to cycle from bright to dim and back. It has quite a brightness range. Lift your finger when the light is adjusted to your liking. And the lamp will remember the setting when you turn it off. They are tall enough to use as a bedside table lamp, but you can adjust the height and swivel. We chose the "desk lamp" version rather than the equivalent wall mount version because it would be easier to reach the on/off switch when laying down in bed. We've had them a week now, and we love them!
[Our order was through Amazon Prime and sold by 340 Lighting each lamp came in its own sturdy box packaging.]
Love this new LED lighting technology!
List Price: $267.00
Sale Price: $178.00
Today's Bonus: 33% Off
These are wonderful lamps. We bought a pair to use on our bedside nightstands. The "chocolate chrome" finish is gorgeous and blends in with our dark cherry furniture. Very stylish design. The light color is very pleasant 3000K which is a warmish white. The on/off button lights up when the lamp is off and is a gentle night light, but not so bright it disturbs sleep. Once you press the on button, hold it down for the lamp to cycle from bright to dim and back. It has quite a brightness range. Lift your finger when the light is adjusted to your liking. And the lamp will remember the setting when you turn it off. They are tall enough to use as a bedside table lamp, but you can adjust the height and swivel. We chose the "desk lamp" version rather than the equivalent wall mount version because it would be easier to reach the on/off switch when laying down in bed. We've had them a week now, and we love them!
[Our order was through Amazon Prime and sold by 340 Lighting each lamp came in its own sturdy box packaging.]
Love this new LED lighting technology!
Review of STRONG CAMEL 3 LED Outdoor Solar Powered Lawn Spotlight Landscape
Posted by
Unknown
on Monday, October 27, 2014
Customer Ratings: 
List Price: $69.99
Sale Price: $41.07
Today's Bonus: 41% Off

Put these things in the ground with the solar collecting cell pointing at the sun for 2 sunny days before I turned them on... I knew they wouldnt be seen from miles away but... HORRIBLE!
Youre better off putting a firefly in a jar...
List Price: $69.99
Sale Price: $41.07
Today's Bonus: 41% Off
Put these things in the ground with the solar collecting cell pointing at the sun for 2 sunny days before I turned them on... I knew they wouldnt be seen from miles away but... HORRIBLE!
Youre better off putting a firefly in a jar...
Click Here For Most Helpful Customer Reviews >>
Received these yesterday and they are not as strong as I had hoped but nothing is as strong as electric. It does do the job though by highlighting our american flag, and some flower beds. Thanks again.Best Deals for STRONG CAMEL 3 LED Outdoor Solar Powered Lawn Spotlight Landscape
The lights work, but they are flimsy and hold water so I have to empty the rain that they hold.Honest reviews on STRONG CAMEL 3 LED Outdoor Solar Powered Lawn Spotlight Landscape
I'm happy with the brightness of the spotlights but I'm not thrilled that the solar plate can not be rotated for better sun positioning. If the light is pointed to far up the solar panel is facing down and not getting optimum sun.Cheap Decorative Small Butterflies Garden Solar Lights With 5 Blinking
Posted by
Unknown
on Tuesday, October 7, 2014
I purchased the butterfly solar lights for placement in the flower bed in our back yard. After 1 day in sunlight, the butterflies came to life and sparkled and glittered until dawn! Very cute and look great at night. Love them! They add a special touch to my garden, making it pretty even in the dark.
expect the rain, and or sprinklers to do them in. They tend to collect water inside. After five months
I have one left that still works.
This is an attractive butterfly garden ornament the will add character to your landscaping or gardens. It is a weighted rock ornament with a built in solar panel that charges a Ni-CD battery that will power the LED's for up to 10 hours. The base does have an on/off switch so make sure that you turn it on for use. It has a sensor that can tell when it is dark enough to automatically turn on the LED's which are bright and the randomly flash to create a beautiful decoration. (Please see my video) The unit is attractive in the daylight and in the night.
Since it is solar powered it is easy to set up, turn it on and forget it. You can set it anywhere outside where it gets sun for about 10 hours per day and it will operate without any additional power. If you set it under a light that is on outside of your home it may not come on. Make sure that the solar panel gets enough light and it not covered up by a flower or a shrub.
This was a birthday present for my wife and she loved it.
Click Here For Most Helpful Customer Reviews >>
I bought three of these for my garden, and they look great. How ever unless you live in a dry climateexpect the rain, and or sprinklers to do them in. They tend to collect water inside. After five months
I have one left that still works.
Best Deals for Decorative Small Butterflies Garden Solar Lights With 5 Blinking
This is an attractive butterfly garden ornament the will add character to your landscaping or gardens. It is a weighted rock ornament with a built in solar panel that charges a Ni-CD battery that will power the LED's for up to 10 hours. The base does have an on/off switch so make sure that you turn it on for use. It has a sensor that can tell when it is dark enough to automatically turn on the LED's which are bright and the randomly flash to create a beautiful decoration. (Please see my video) The unit is attractive in the daylight and in the night.
Since it is solar powered it is easy to set up, turn it on and forget it. You can set it anywhere outside where it gets sun for about 10 hours per day and it will operate without any additional power. If you set it under a light that is on outside of your home it may not come on. Make sure that the solar panel gets enough light and it not covered up by a flower or a shrub.
This was a birthday present for my wife and she loved it.
Honest reviews on Decorative Small Butterflies Garden Solar Lights With 5 Blinking
These are nice but I guess I was asleep when I read the review and saw "small". These are REALLY small. I gave it as a Christmas gift and it will look nice beside a small birdbath, but this is a small item. So be aware that you cannot locate it in a garden with medium (like a tulip) or taller flowers or it will be lost. But it is pretty.Find helpful customer reviews and review ratings for Decorative Small Butterflies Garden Solar Lights With 5 Blinking
Nice product. Beautiful addition to my garden. Had to put new batteries in it to get the full effect. Would recommend this purchase.Discount T8 LED Tube - PACK OF 2 - A 4ft. (48") Fluorescent Tube Replacement
Posted by
Unknown
on Friday, October 3, 2014
I purchased a two pack of these. Although packing included plastic bag inside of shipping tube inside of a box inside of another box, there was a dent in the aluminum housing on one bulb and numerous scratches. The bulbs were instant start. Although advertised as cool white, they were labled 5000K and looked quite a bit warmer that some 2044wh bulbs purchased from LED Wholesalers which were advertised as white and were unlabelled as to color. I purchased both to see which I preferred, the item being reviewed was less harsh than the 2044W. So beware that the advertised colors are not standardized. I did not return the dented one yet as the item is out of stock and I really do like its color, bright but not too harsh. Try a few bulbs before making a large purchase. All in all, trying to figure out the color on Amazon and the vendor's websites is difficult and confusing.
Downside: not dimmable (I tried). In my computer room, having two of these puppies is like being in direct sunlight, probably not the best choice; I may wind up flipping them over (unlike omnidirectional fluorescent tubes, these have distinct "up" and "down" sides, which probably contribute to how vright they are). For a workshop, garage, etc., they are unbeatable. And completely silent, and instant full-on, and low-energy.
And BRIGHT!
Click Here For Most Helpful Customer Reviews >>
My old Fluorescent tubes had started to flicker, though it could have been the ballast. I decided to replace them with LEDs and ended up choosing these based on various reviews. I'm very happy with the increased brightness, the new-found silence and the instant-full-on behavior. The power savings is a bonus, though I'm not sure it'll ever pay back unless it was the ballast that needed replacing. Some of the existing wires in my fixture where too short, so I had to patch in an extra section of wire.Best Deals for T8 LED Tube - PACK OF 2 - A 4ft. (48") Fluorescent Tube Replacement
You saw the price already... I think they are worth it. It takes about 5 min to bypass the ballast in the light fixture. YouTube "how to remove fluorescent ballast" and you can watch a video. The instructions that come with the lights are good enough to figure it out, but pictures are nice to. My light setup is negative on one side and positive on the other, the lights work fine. I am not sure about longevity yet because I just installed them. The only thing besides the price that I don't really like is that the lights here are cooler than what was installed. More blue, but I'm sure I will get used to it.Honest reviews on T8 LED Tube - PACK OF 2 - A 4ft. (48") Fluorescent Tube Replacement
The lights arrived on time and were properly packed. Two problems. Only half one of the two lights came on, that is, only 24" out of the 48" lit up. The other light worked fine (so far). The other problem is that these seem to be about 1/4" shorter than a standard T8 lamp. This makes it very difficult to install in a standard fixture and I had to modify the fixture so it would fit and not fall out. One other reviewer said that his was 1/8" too long. If this is the case, then they have a major problem with quality control. I will have to find out how the seller will replace the defective lamp. Since it was "fulfilled" by Amazon, I guess that I have to deal with the seller directly.Find helpful customer reviews and review ratings for T8 LED Tube - PACK OF 2 - A 4ft. (48") Fluorescent Tube Replacement
Bright. BRIGHT!!! I replaced a dual-tube setup (40 watts each) and this lights up the room several times brighter. Pretty easy to install, too. Hint: if your fixture has separate ballast wires dedicated to every single pin on your existing fixture sockets, you don't need them: just one wire going to each end will suffice, because the LED driver built into these tubes are connected to both pins. Mine had waayyyy too many wires to connect everything with a wire nut, and then I discovered that most of them are completely superfluous with this LED tube so I just cut off the extras and terminated them with their own wire nuts.Downside: not dimmable (I tried). In my computer room, having two of these puppies is like being in direct sunlight, probably not the best choice; I may wind up flipping them over (unlike omnidirectional fluorescent tubes, these have distinct "up" and "down" sides, which probably contribute to how vright they are). For a workshop, garage, etc., they are unbeatable. And completely silent, and instant full-on, and low-energy.
And BRIGHT!