Showing posts with label lamp store. Show all posts
Showing posts with label lamp store. Show all posts

Best Pelican 2360 LED Tactical Light, Black Deals

Pelican 2360 LED Tactical Light, Black
Customer Ratings: 4.5 stars
List Price: $49.95
Sale Price: $37.33
Today's Bonus: 25% Off
Buy Now

I was in search of a small tactical flashlight that was powered by aa batteries. There are a lot out there and Im glad i purchased this one. This flashlight replaced my old Streamlight stinger on my duty belt. I use this quite a bit at work. It emits a nice white led light, which had bad exp. in the past with LED lights. The tactical switch is momentary and click on/off which is a huge plus. Fits perfectly in both my Bianchi aa light holder and Bianchi 6p case. Very compact and I will be purchasing more for the house/car, camping etc. For 28 bucks this is well worth every penny. With Pelican's warranty and brand name, you would be foolish to pass this up!

Click Here For Most Helpful Customer Reviews >>

Wow have flashlights advanced a bunch in the past 10 years.

I've had a couple of these for 2 years and use them quite often. One I put it my smallest toolkit and use it quite frequently the other I put in my toolbox at the machine shop and it gets beat up.

They are very bright and tough. It's the size of the old mini mag lights, but brighter than the conventional big boy 4 d mag light which is amazing.

I would say there's no better value for under $100 and I don't have a need, nor can't imagine a need for anything over $100.

I have a couple of surefire G2's and a Streamlight Polytac this is much brighter than the surefires and almost as bright as the polytac.

And it runs on AA batteries, rather than the hard to find and expensive 123's. The AA's don't last as long, but cost wise it's probably cheaper to run even if you change them more often, because the batteries are cheaper.

The switch works good, It's made out of aluminum with a pretty tough black finish it has flats to keep it from rolling off a table. I've used it in the rain and the cold and that didn't seem to affect it.

Dislikes none really I guess I could say the knurling on the handle is more cosmetic than useful. For everyday use, it's very good.

I would say it's between this and the polytac for may favorite light. I slightly prefer the plastic of the polytac over the aluminum of this pelican, and the polytac is a bit brighter but this pelican is thinner, uses AA batteries, which is a big plus, and it's cheaper by about $10-20.

Buy one, you won't regret it.

Best Deals for Pelican 2360 LED Tactical Light, Black

I purchased two of these. The first had a faulty switch. It worked for turning the flashlight on and off, and from hi to low. However, moving the flashlight in my hand would also cause it to go from hi to low, and not return. I made sure the cap was properly tightened. I suspect a bad component in the switch. The second unit did not work at all. Fresh batteries, and no light. I am returning both units for a refund.

Honest reviews on Pelican 2360 LED Tactical Light, Black

I was looking for an inexpensive, bright, sturdy, compact flashlight and I definitely got it. The momentary on function is a plus for me. The flashlight itself feels almost indestructible and I like how the head is an octagon which prevents it from rolling off a table. I'm not a professional flash-light carrier, but I think this is a wonderful product for the money.

Edit: The clip is actually a weak point, to the point of being nearly useless. I tried clipping it to my belt and it just popped off. But for 30 bucks, even with a hardly functional clip I give the light five stars.

Find helpful customer reviews and review ratings for Pelican 2360 LED Tactical Light, Black

Love this! I use it all the time around the house and outdoors, Very very bright! Its nice not having to fully push the button until it clicks to turn the light on. Great buy!

Buy Fom Amazon Now

Cheap GE 45614 Z-Wave Wireless Lighting Control 3-Way Switch Kit

GE 45614 Z-Wave Wireless Lighting Control 3-Way Switch Kit
Customer Ratings: 4 stars
List Price: $79.99
Sale Price: $55.92
Today's Bonus: 30% Off
Buy Now

Quick Review:

If you're converting your 3-way light switches to z-wave controlled ones but want to use fluorescent bulbs, this is the answer. Installation is easy enough once you understand how the switches and light fixtures are wired together. Get them for around $50 here on Amazon.

Full Review:

I decided to start switching over my home to use z-wave for home automation and needed to find light switches to use around my house. After reading some of the reviews for the 3-way dimmer version of this switch, I opted to go for these to convert my home. I already have fluorescent light bulbs for almost every light fixture and being able to dim most of the lights was not a priority for me.

This product is just a GE 45609 Z-Wave Wireless Lighting Control On/Off Switch packaged with an auxiliary switch (GE 45610) so that you can have it control a 3-way (or 4-way, you'll need another aux switch) circuit. It's meant to replace and EXISTING 3-way circuit without any new wiring required. I used these instead of the GE 45613 Z-Wave Technology 3-Way Dimmer Switch Kit due to the fact almost every single light in my house is florescent.

To wire the primary switch, you need to have ground, neutral, line (hot), load (to the light), and a travel wire leading to the other switchbox where the aux switch will be located. The aux switch only needs a ground, neutral, and the travel wire that leads back to the primary switch. Now you should be able to check your wiring and verify you have all the needed wires before tearing everything apart. For me, all the neutral wires were bound together, capped off, and shoved to the back of the box.

I have installed a total of 3 of these sets now. The first one I installed was one I had ordered from Amazon's warehouse which had been opened and returned (I'm cheap, I'll save $5-10 every chance I get). I spent the better part of 2 days trying to figure out why I couldn't get it working. Finally the idea dawned on me to see if the primary switch worked properly on it's own. Nope, it was DOA, so back to Amazon it went (No that's not the reason I took away a star). Next up, a brand new one. So the brand new one went in as did the aux switch and worked perfectly. Total installation time for the first switch? About 9 hours of me wanting to break things because the first (used) switch was broken and about 30min to install the second (new) switch along with the aux switch. The next 2 sets of 3-way's I installed only took about 15-20min each now that I had the wiring down. I'm not a professional electrician but I'm sure if I kept at this, I could have them installed in about 10min.

I think the directions could be expanded to include a few other ways a 3-way circuit can be wired as they only have a diagram showing one of the ways it could be wired. Lack of proper documentation for products is a major annoyance to me and the reason I docked a star. Seriously, pay someone for the extra 2 hours it would take to be thorough for your documentation.

Another thing I feel need to mention because I've seen it in other reviews on here is the distance limitation between the switches. One of my switches is about 18 feet apart straight-line distance across the room. This doesn't account for the extra 4' on either end to get up the wall to the ceiling or the fact I have a vaulted ceiling it has to cross. The shortest my wiring can possibly be is ~30'and my aux switch has no issue turning the light on and off.

Quick hints:

-Wire in the primary after removing both switches from the old 3-ways and make sure it will turn on and off the light. Then you can move on and install the aux switch.

-Mark the wires as you take them off the switch!

-Check and double-check you're hooking up the correct wire to the correct spot on the switch. You'll feel stupid having to undo it all when you mix up the line and load wires.

-If you have 2 or more of these installed next to one another, you'll need to break off the tabs on the side so they can fit close enough together to put the decorative plate over them. Only break off the ones you need to get them to fit.

-For doubleand triple-gang installations, I just daisy-chained the neutral (same with the hot/line) because it was just easier than pulling out the whole bundle for me. (No idea if this follows local wiring code but it's working just fine.)

Other Thoughts;

The blue LED isn't extremely bright and doesn't bother me. By default, it is ON when the switch if OFF and OFF when the switch is ON. It can help someone unfamiliar with the light switch location to find it in the dark. If you have an advanced remote, you can switch it so the LED is ON when the switch is ON. You can also install the switch upside-down and flip it to the correct way using an advanced remote. I haven't tested either of these because the default is what I needed.

I have paired these switches to a couple different types of remotes and it has worked fine with all of them, A Go Control panel, one of the basic GE remotes, and a Intermatic HA-07 remote. Hurray for interoperability!

You can hear the relay in the switch click when your turn it on and off. Not really a big deal because my old switches clicked when I flipped them on and off. I think you might notice it a lot more if you use the remote to turn the lights on and off. I've gotten used to it and barely even notice it anymore.

These take up a lot more space in the electrical boxes but I didn't have any issues with not being able to get them to fit properly.

Click Here For Most Helpful Customer Reviews >>

I recently installed two sets of these switches to control my outside flood lights. For the most part, installation was fairly easy, and they've worked perfectly so far. The key to having a successful installation is understanding how a traditional 3-way switch system is wired, and how these Z-Wave switches differ from those of a traditional installation. Once you understand the difference (which took me a while), installation becomes pretty straightforward.

My only complaint is that these switches are much deeper than traditional switches, and thus they leave very little room behind them for wires. The most frustrating part of installation for me was trying to cram wires in the back of the electrical box so that the switches would fit. I'm sure the size of these switches is necessary for the Z-Wave functionality, but it made for a very unpleasant portion of the installation. I'm fairly new to electrical work, so I wasn't about to swap out the electrical box for a roomier one.

I'd like to share what I've learned about 3-way switches in general and these switches in particular in order to help others who may be fairly new to doing their own electrical work:

A traditional 3-way switch has three terminals: one common, and two travelers. In a typical configuration, depending on where the switch is situated in the circuit, the common wire is either bringing power from your service panel ("line") or continuing on to the light fixture ("load"). The two 3-way switches are connected together by the two traveler wires. When both switches are connecting their respective common wires to the same traveler wire, the circuit is completed, and the light goes on. If each switch is connecting its common wire to a different traveler wire, then the circuit is interrupted and the light is off.

In a traditional 3-way switch system, both switches are identical, interchangeable, and equal partners in the work that they do. This is not the case with these Z-Wave switches. This set consists of a GE 45609 Z-Wave Wireless Lighting Control On/Off Switch (which can be used by itself in a single-switch installation) and a GE 45610 Z-Wave Auxiliary Switch. The primary switch does all the work of completing or interrupting the circuit, and it contains the Z-Wave functionality. The auxiliary switch basically acts as a wired remote control that sends a signal to the primary switch.

In this setup, both the line and load are wired directly to the primary switch, and only one traveler connects it to the auxiliary switch. This is actually pretty easy to accomplish with existing 3-way wiring. At the primary switch, the old common wire becomes the line, use one of the old travelers as the load, and use the other as the only traveler. Then, at the auxiliary switch, connect the traveler to the switch, and connect the other traveler (now the line) directly to what was the common wire (load) on the traditional 3-way switch.

There are multiple ways to wire a 3-way switch configuration, so your own installation may differ slightly. However, the same overall concepts will apply: one of the old travelers remains a traveler, and the other one connects directly to the line/load (common), bypassing the auxiliary switch entirely.

One final note: All of these Z-Wave switches also require a neutral connection in order to power the switch itself. This usually isn't an issue, but occasionally you'll encounter an end-of-line switch configuration where the neutral/white wire is used as hot, in which case you won't be able to replace it with a Z-Wave switch.

Best Deals for GE 45614 Z-Wave Wireless Lighting Control 3-Way Switch Kit

I put fifteen of these in last year (actually had the electrician do it). The single switches seem to hold up "ok" (I've only lost one) but the 3-ways have been failing pretty regularly. I have lost five of them so far. Darned expensive switches to last under a year. I am going with a different brand. The GE junk is penny wise and pound foolish I am afraid.

Honest reviews on GE 45614 Z-Wave Wireless Lighting Control 3-Way Switch Kit

So first off...I knew nothing about wiring before I started this. I knew the basics of electricity and that was it but I was determined that I didn't need an electrician to install these. I ordered 2 sets as I had 4 switches that I needed to replace/upgrade. Both of them were defective, which I figured out after two days of troubleshooting. Amazon's return process was easy and when the new ones arrived, put them in with no issue...took 15 mins.

A note about wiring though.... make sure you have a good understanding about the wiring in your house....I spent an hour learning exactly which wire did what and where it came form and went to. Not a fun experience but I plan to upgrade my whole house...so hiring someone and not learning was out of the question.

As for the directions...they make sense for the most part but of course I had extra wires that were not documented on them...so I had to figure out where to put them. Even had to re-wire and splice existing wiring to get these to work...so beware.

Find helpful customer reviews and review ratings for GE 45614 Z-Wave Wireless Lighting Control 3-Way Switch Kit

I've wired 2 of these in my house as a 3 way and 1 as a 4 way switch. Wiring took a bit to figure out, so if you're even a little unsure, hire an electrician. It's cheaper than a trip to the hospital or a burned down house. In short these guys are perfect. I hooked them up to my ADT Pulse system and can control them from anywhere in the world. Kind of awesome. Easy add to my ADT Pulse system. I originally did get a bad one, but Amazon quite handily replaced it for me for free. Totally recommend these for someone trying to turn his or her house into a smart home.

Buy Fom Amazon Now

UTG Defender Series Weapon and Handheld Tactical Xenon Flashlight Reviews

UTG Defender Series Weapon and Handheld Tactical Xenon Flashlight
Customer Ratings: 4.5 stars
List Price: $39.95
Sale Price: $32.10
Today's Bonus: 20% Off
Buy Now

This really is a great flashlight for the money. It's every bit as bright as the D-Cell maglight I compared it to. The fit and finish of the parts that make up this flashlight are very good quality considering the price point. Good fine threading on the base and the shroud, a real polished aluminum reflector rather than crome plated plastic is a nice touch.

Several factors lead to the fifth star coming off.

First, and foremost, there is no "on-off" switch per say. There are two setups availible for this light, the temp button or the pressure switch. Neither will allow you to tap-on or tap-off like some of the higher priced units. Having to hold down the pressure switch can lead to some reliability issues in a tense situation, and not having the pressure switch can be cumbersome depending on weapon choice. You can always screw the back in all the way to get it to stay on, but that's not a very tactical nor very fast. (especially on a shotgun)

Second, the mounting hardware included with the light is just a couple of thousands of an inch too big. When you crank down the allen screw that tightens the grip on the light's barrel, it just doesn't get quite tight enough for some heavier applications like shotguns. If you'll be mounting this on an AR platform or something with light recoil, it shouldn't be a factor for you. But if you're getting this specifically for a high recoil weapon like a shotgun, prepare to be shopping for a new mounting bracket soon.

Lastly, attention to detail in final assembly is not what it should be. The lamp is mated to the reflector via very fine threads that can easily be cross-threaded and sure enough, they were cross-threaded right out of the box. This affects beam size, brightness, placement as well as the lights ability to handle recoil.

Be sure to field strip this light down to the bones and put it back together with great care. I added some brake grease to the threads to help with threading and water resistance and once the lamp and the reflector were mated correctly, the beam was perfectly focused and VERY bright.

Overall I absolutely love the light. It's a great deal for the money, I'll probably be buying a second one to carry aside from weapon mounting. There are just a few issues that cost it that last star.

Click Here For Most Helpful Customer Reviews >>

This flashlight is extremely bright, rock solid design with no rattles or looseness. I did have to exchange the tactical slide on mount for a new one that actually fit and tightened around the light case (reason for not giving it 5 stars) But once that was fixed, it fits like a glove on my gun! LOVE IT!!! Amazing product for the inexpensive price!! Other $200-$300 lights i have tested aren't even this bright!

Best Deals for UTG Defender Series Weapon and Handheld Tactical Xenon Flashlight

I am in Afghanistan and use this light for everything! The pressure switch is very useful! I have it mounted to my M16... The rail I had was a little big but I managed to fit it on by loosening the light mount all the way! Love this light and use it everyday! Very Bright! Very Heavy Duty! Love it!

Honest reviews on UTG Defender Series Weapon and Handheld Tactical Xenon Flashlight

I purchased this light for my S&W M&P 15-22.The light is very bright and looks great. Mounting took less than five minutes and the pressure switch was an easy mount on the forend handle. Great buy for the money.

Find helpful customer reviews and review ratings for UTG Defender Series Weapon and Handheld Tactical Xenon Flashlight

I spent years in manufacturing quality control. I can't find any reason to fault this in any way. it is very well made. the fine threads require some care and grease. Very bright. I can't figure what could make the competition worth 100 plus dollars more.

Buy Fom Amazon Now

Steinel FL300W - 300 Watt Dual Flood Light Motion Sensor, White Review

Steinel FL300W - 300 Watt Dual Flood Light Motion Sensor, White
Customer Ratings: 4.5 stars
Buy Now
Firstly, I want to state that this floodlight was purchased after considering many others.

The concern that we had with other lights sold in Home Depot or Lowes is the number of complaints from folks who say that they have failed after a year or so.

The Steinel FL300W was rated well on other sites and we were also impressed by the way in which it was constructed.

For instance: it is rain-tight and has built-in surge protection.

We installed the floodlight 20 feet or so above the backyard where there are trees toward the back.

It is meant for security and for any time when we would like to see such as when our dog is outside.

It is mounted just below the eave at the back of the home, at the top of the second story.

We did not want to pull new wires from the second story down to the first but wanted access to a switch on the first floor for a manual on/off.

In order to accomplish this the light was installed via an existing electrical line in our attic and connected using a Leviton 15A Fixture Relay Module (Catalog # 6375).

Downstairs, we installed a Leviton Decora Switch Controller (Catalog # HXC10-1TW) which was wired for power in conjunction with an existing standard wall switch.

This provides us with remote on/off switching over existing electrical lines without the need for complicated wiring.

With a normal motion sensor any amount of wind could trigger the light unnecessarily by trees swaying in the breeze and we wanted to avoid this problem.

Thankfully, this unit uses infrared to detect heat.

Because of this there is no need for sensitivity control, range control or seasonal adjustment.

It only has two settings:

1) timer setting to determine how long the light should stay on after turning on

2) twilight setting light threshold for turning on between full daylight to darkness

The twilight setting works as expected but the timer setting is bit difficult to correctly adjust.

The threshold is between 10 seconds and 15 minutes and the light seems to stay on for a considerable amount of time (12 minutes) when set directly between these two values.

It takes time to adjust and test correctly based on your needs and can be quite annoying if you are doing so on a ladder.

The shoulder and elbow joints are difficult to move according to the instructions and feel like the unit will break if forced too hard.

The shoulder joints move after pulling them out-of-socket whereas the elbow joints just snap when twisted.

A few successful turns before you install the light will help you determine the right threshold.

It is recommended that you adjust the direction close to how you would like it before installation.

As far as the sensor goes the unit seems to have no problem picking up a person from 20 or so feet above.

However, our dog doesn't seem to trigger it at all.

In this casewe just manually override the light by turning it off and then on from the switch on the first floor before we let her outside in the evenings.

The sensor is easy to move up and down and swivels from left to right.

Also included in the box are clip-on shrouds for covering certain areas of the sensor to avoid detection in different areas.

We don't use these as we want total coverage.

Lastly, we were wondering if the floodlight could accommodate Compact Fluorescent Lights (CFLs) but this isn't mentioned on the box, in the manual or on their website.

We called their main number and they provided us with a direct 800 number to a technical contact.

He stated that the light may not work with some CFLs as their screw caps and electrical contacts are sometimes of different length than that of normal bulbs.

Otherwise, he stated that he has a light that has been working for a year with CFLs.

But he also said that some customers have stated their lights have stopped working after a year and that it was typically not a problem with the fixture itself.

At the end of the call he recommended against using CFLs as there was not conclusive evidence that everything should work as expected with our particular setup, including the Leviton relay module.

Click Here For Most Helpful Customer Reviews >>

When first installed, we called Customer Service because the lights wouldn't come on. The rep was very helpful, identified the problem immediately (the small plates at the bottom of the socket which must connect with the light bulb had bent too far into the socket to make connection) and when we followed her simple directions, we were in business. It took a couple of tries to get the motion detector aimed exactly right, but once we figured it out, it operated perfectly. I have a narrow front yard, and we were able to zone in on the driveway, lawn and walkway. Passing cars, tree shadows, small animals, or people on the sidewalk do not light up the night However, one step onto the property, and the lights are on. If you want to cover a larger area, aiming it becomes even easier. We have it set to operate only at night and to stay on for ten minutes after all motion stops, but the light offers other options on its menu. We have a very high roof line, and the less expensive light we first purchased only triggered if we jumped up and down and waved our hands in the air. We wanted to mount the light high enough that a prowler couldn't just reach up and unscrew the bulb. We were able to mount the FL300 under the peak of the eaves and it operates flawlessly even in driving rain.

Best Deals for Steinel FL300W - 300 Watt Dual Flood Light Motion Sensor, White

Had previously bought motion lights at my local "big box" hardware stores for my current and prior houses. I had trouble with both. Both were overly sensitive and turned on with strong winds and often failed to turn on in bad weather. My most recent one was so unreliable, that I had it switched off most of the time. After some bugging of the wife, I did some research and found this light.

All the reviews that I found (both here on Amazon and elsewhere)were positive. I installed it a few days ago and it has worked well so far. It is built well and appears to be designed well also. An example of this are the nice rubber gaskets encasing the light sockets, to keep them water tight. Much better than my prior motion light.

So far, I have had no problems with it turning on due to wind. It also works fine so far in cold weather (low teens). The only nuisance so far was setting the length of time that I wanted it to remain on, after being activated. That took several tries, but now is fine. I also like that it uses regular flood lights, instead of the often used halogen bulbs. The floods are cheaper and I have more options for how many watts I want the bulbs to be.

Honest reviews on Steinel FL300W - 300 Watt Dual Flood Light Motion Sensor, White

I bought this Fixture because it was rated so well on Amazon & elsewhere. Mine has a range of only about 15 feet and doesn't detect quite so well from straight in front (Middle of driveway). Also, be careful when tightening screws holding unit to back plate..... That said, Steinel really has offered to stand by their product and has offered advice and a direct replacement for faulty motion detector. Steinel has really shown a great customer service commitment with my issues.

Find helpful customer reviews and review ratings for Steinel FL300W - 300 Watt Dual Flood Light Motion Sensor, White

I have never had good luck with motion lights in the past. They work for a while, then for some reason or another they wont turn off or

just quit working all together. When I checked the FL 300W I found mostly good reviews. It took me a little while to figure the proper

assembly (Im getting up in years and dont comprehend like I use to) However the light went up, the power turned on and the light seemed to work just fine. I changed no settings. It is factory set for daylight and cycle 15 to 20 seconds. It came on and went off, on and off over and over again with no motion causing the problem. I checked the wireing and it was OK. I even added a dedicated line. But long story short, I contacted the Steinel Company and they promptly sent me another light. Its up and working just fine. Steinel customer service was just great. I really hated to write this somewhat negative review, but I'm trying to be completly honest about what happened. I would't hesitate buying a Steinel product again. I am still giving the product 5 stars.

Buy Fom Amazon Now

Reviews of E27 3w 85-265v 3500k Warm White LED Light Bulb

E27 3w 85-265v 3500k Warm White LED Light Bulb
Customer Ratings: 4 stars
Buy Now
Seller accidentally shipped me these instead of a similar product for 12VDC applications with the GX5.3 bi-pin connector. In short, to avoid the return hassle, I tried these in a 120VAC bathroom fixture and in sconces elsewhere, and it turns out they're really quite nice, so I'll keep them and hope a reorder results in the correct product.

The bulbs run barely warm to the touch, are very compact, and their physical packaging doesn't look outlandish or industrial, on the wall. Their light is warm and pleasing, and creates a showy pool where the bulb is pointed. The 3500°K color temperature appears to be accurate, and they have consistent color and output from bulb to bulb. They are directional, as spotlights should be; just keep that in mind if you're thinking about replacing omnidirectional bulbs such as CFLs or globes. This LED's output has the look of display halogens like one might see in an art gallery.

So, I'll call this a five-star pleasing product that I got to try by accident. That's why you won't see the 'verified' checkmark here.

Click Here For Most Helpful Customer Reviews >>

I got these bulbs for my wife's china cabinet and they fit perfectly and provide amazing light. I did get the wrong ones on the first shipment but the seller quickly turned around and sent me the correct bulbs. Would definitely buy again.

Best Deals for E27 3w 85-265v 3500k Warm White LED Light Bulb

this product has turned out very good, works great, and my wife is delighted with it, is what I expected thanks.

Honest reviews on E27 3w 85-265v 3500k Warm White LED Light Bulb

This is a really Great light bulb, I used It in can lights and it had a cool spot. A very nice white tint. Not too yellow or greenish like some LEDs.

Find helpful customer reviews and review ratings for E27 3w 85-265v 3500k Warm White LED Light Bulb

I bought this to replace the bulb in my curio cabinet. It was much cheaper than any LED sold in Lowes, Home Deephole (Depot; every time I go there, I get deeper in the hole!), Ace, etc. Also, the light gives it a cleaner look and should save in electricity cost in the long run especially that I have LIPA for my electrical utility!!!.

Buy Fom Amazon Now

Best Aurora 6W MR16 Ultra Bright LED Bulb - White Deals

Aurora 6W MR16 Ultra Bright LED Bulb - White
Customer Ratings: 5 stars
List Price: $25.99
Sale Price: $8.99
Today's Bonus: 65% Off
Buy Now

I have tried many different bulbs and found this one after many fails.

It is really nice quality and you can feel that from picking it up and seeing it in the flesh.

It has a nice bright white light and I would say is about the same as a 35W standard bulb.

Everyone who has seen these also comments and says they look great so I am very happy.

Click Here For Most Helpful Customer Reviews >>

Cheap GE Lighting 10692 25-Watt Appliance Intermediate Base T7 1CD Light

GE Lighting 10692 25-Watt Appliance Intermediate Base T7 1CD Light Bulb
Customer Ratings: 4 stars
List Price: $9.99
Sale Price: $3.79
Today's Bonus: 62% Off
Buy Now

I purchased this light bulb as a replacement for my daughter's lava lamp. She let me know that it died in less than 2 weeks. For the price of the bulb...definitely didn't get even a sliver of my money's worth.

Click Here For Most Helpful Customer Reviews >>

Lights up my dryer very well. Works well, if your looking for a dryer light or appliance light this is very bright.

Best Deals for GE Lighting 10692 25-Watt Appliance Intermediate Base T7 1CD Light

Had these bulbs for about 3 weeks now. No problems with them as opposed to the other off brand type bulbs. These fit perfectly in my Whirlpool microwave.

Honest reviews on GE Lighting 10692 25-Watt Appliance Intermediate Base T7 1CD Light

My microwave is the kind that is installed above the oven, and to get some decent lighting while I'm cooking, I have to keep the microwave light bulb in working order. This light bulb fits the socket and works great. I've considered buying the socket reducer (intermediate to candelabra) so I can use the cheaper candelabra light bulbs. However, it's so easy and convenient to just order these appliance bulbs from Amazon, that I haven't bothered with it. I'll probably continue buying these.

Find helpful customer reviews and review ratings for GE Lighting 10692 25-Watt Appliance Intermediate Base T7 1CD Light

Good bulb, I decided to buy 2 because the price was very good, my son need it for "lava lamp", so it resolve the problem.

Buy Fom Amazon Now

Discount Lighting EVER® iLUX Dimmable 10W A19 LED Bulb, Equal to 60W

Lighting EVER® iLUX Dimmable 10W A19 LED Bulb, Equal to 60W Incandescent Bulb, 820lm, Samsung LED Inside, UL, Warm White
Customer Ratings: 4.5 stars
List Price: $27.50
Sale Price: Price Unavailable
Today's Bonus: 49% Off
Buy Now

Reasonably priced. The light is more white than yellow, so if you want warm light, go for a warmer option. Mine make a faint hum on a Lutron Maestro dimmer, but dim perfectly. The hum is very quiet and I would buy these again. Indeed, I am doing so right now.

Click Here For Most Helpful Customer Reviews >>

These bulbs have a very pleasing light quality. I'm using them in a bathroom, three in a fixture above a vanity mirror. The efficiency is amazing; the three 10W bulbs replaced three 60W bulbs and are significantly brighter. However, the incandescent style dimmer which worked perfectly with incandescent bulbs is almost useless with these 'dimmable' LEDs. The bulbs begin to buzz audibly at any setting lower than 100%. They also only dim to perhaps 50% all the way down, where the incandescents were literally night lights.

Best Deals for Lighting EVER® iLUX Dimmable 10W A19 LED Bulb, Equal to 60W

This bulb is actually brighter than the generic 60w incandescent bulb it replaces. Doesn't appear or feel to be cheaply made. Remains to be seen if it will withstand the test of time.

I also bought a Feit Electric 13.5 Watt LED Omni. This bulb is almost as bright, and almost as omni directional. I will purchase more Feit bulbs but only because they are less expensive at this time. I would be comfortable purchasing more of these if the Feit bulbs are out of stock or become more expensive than these.

Honest reviews on Lighting EVER® iLUX Dimmable 10W A19 LED Bulb, Equal to 60W

Very good!, OK!

Complies with what I wanted the shipping was very successful

It is an article of excellent quality, works fine I recommend this product

Find helpful customer reviews and review ratings for Lighting EVER® iLUX Dimmable 10W A19 LED Bulb, Equal to 60W

Before trying the iLUX 10W bulb my favorite LED bulb was the Phillips Ambient 12W based on its ability to give all around light like a regular incandescent bulb. However, the iLUX beats the Phillips on all important fronts. It is brighter (even though they are rated almost the same at 810 and 820 lumens I find the iLUX to be noticeably brighter); it uses less energy (10W vs 12W); and it is cheaper. Therefore the iLUX has now become my standard for LED bulbs. I have bought two sets of four so far and I will be buying more soon. I am very satisfied.

Buy Fom Amazon Now

Reviews of HemingWeigh® Natural Himalayan Rock Salt Lamp 6-7 lbs with Wood

HemingWeigh® Natural Himalayan Rock Salt Lamp 6-7 lbs with Wood Base, Electric Wire & Bulb
Customer Ratings: 4 stars
List Price: $29.99
Sale Price: Price Unavailable
Today's Bonus: 40% Off
Buy Now

AWESOME Himalayan ROCK. Was delivered the next day and was very impressed when I opened the box. Will order more SOON!

Click Here For Most Helpful Customer Reviews >>

Lovely, lovely, lovely! Pretty, useful and makes any room comfortable. It comes with plug, lead, wooden base and bulb. So it's ready to go! I've seen similar lamps before but much more expensive...This wasn't expensive at all, so much so I bought two more. They give off enough light to read but not too much to spoil the look. It also clears the air and makes the whole feel of a room better.

Best Deals for HemingWeigh® Natural Himalayan Rock Salt Lamp 6-7 lbs with Wood

Excited to receive this product since I already have a similar lamp and love it. How disappointing!The light bulb was still in its own box and the wooden base had then been put in place and there was no way to access it. This whole unit would have to have been reassembled just to get to the light bulb. The cord had a switch and the switch was also defective in that it was askew and inoperable. Obviously, no quality control and this all made me extremely leery as to the safety of this product.

Buy Fom Amazon Now

Cheap Motion Sensitive LED Coach Lantern

Motion Sensitive LED Coach Lantern
Customer Ratings: 3.5 stars
Buy Now
The light was packaged well and was easy to install. I'm disappointed that the motion detector doesn't work. The light stays on all of the time in every setting. I think it has something to do with the LED light bulbs. I purchased this light for the motion detector feature. I wanted it to come on when someone approached my front door but it will only work on or off from the switch. I decided to just live with it, it has a good look and doesn't use much power.

Click Here For Most Helpful Customer Reviews >>

Cheap, looks good, led bulbs are worthless and burn out quickly. Stopped working completely in about 8 months. Don't buy

Best Deals for Motion Sensitive LED Coach Lantern

Received the product in good condition. One of the LED bulbs did not work but just replaced it with a regular bulb. We had purchased two of these lanterns from Sam's and one did not work so we took it back to Sam's to get another one. It was not available. We needed a replacement so we took it apart and saw that it was from Lights of America so we tried Amazon and we are happy with it and it matches the other one perfectly.

Honest reviews on Motion Sensitive LED Coach Lantern

Love this lamp. My 2nd one. Bought the first one for my front door at Sam's club 2 years ago, and had to get a matching one for the garage light. It has motion detector sensors, as well as dusk-dawn sensor. The bronze is truly weatherproofed; there has been no loss of color, no rust, etc. Would have given 5 start, except that the included LED lights are horrible. Had to subsitute clear incandescent bulbs, which give a wonderful bright light. Relatively easy to install, did it myself.

Find helpful customer reviews and review ratings for Motion Sensitive LED Coach Lantern

I've had this Lantern for about six months now, at it worked great. The motion sensor didn't have any false motion activations and the light the led's put out was fair at best. After about two months of usage I noticed that one of the led bulbs in the lantern was no longer working. Couple of months later the second led burned out leaving only one bulb which alone gives very little illumination. The replacement bulbs are way too expensive to be cost effective. Would not buy again.

Buy Fom Amazon Now

E27 IR Infrared Motion Sensor White LED Light Bulb Lamp 6.5W Review

E27 IR Infrared Motion Sensor White LED Light Bulb Lamp 6.5W
Customer Ratings: 4 stars
Buy Now
I installed one in an outside fixture that is enclosed and elevated. The sensor does not seem to work in these conditions. They work well if the fixture is open-ended and the top of the bulb is facing the open end or pointed downward.

Click Here For Most Helpful Customer Reviews >>

Using in a pantry. Works well in daytime when pantry is dark and room is light. Wish it were a little brighter.

However at night it curiously does not turn off when the room pantry is in is dark also.

Overall the only working application I found for use as a sensor in a can light.

Best Deals for E27 IR Infrared Motion Sensor White LED Light Bulb Lamp 6.5W

I purchased four bulbs for use in different locations. I've found they are most effective when they are in an elevated position such as in the overhead of a stairwell. When they are installed in fixtures that are on the wall at just above head level the detection/activation range is greatly reduced, which is my only complaint. All the installations were in open "fluted" type fixtures. I am satisfied with them based on their price and their overall performance.

Buy Fom Amazon Now

Best Kichler Lighting 15191BK 12-Volt Low Voltage Underwater Pond Light Deals

Kichler Lighting 15191BK 12-Volt Low Voltage Underwater Pond Light with Heat Resistant Flat Glass Lens, Black
Customer Ratings: 5 stars
List Price: $135.00
Sale Price: $79.49
Today's Bonus: 41% Off
Buy Now

Have a waterfall and wanted to put dome uplighting to the falling water and rock. This light is built with durability in mind. Very solid and heavy to stay under water. Highly reccomend.

Click Here For Most Helpful Customer Reviews >>

Best Lumilite 4850 Z-Lite 6-Volt/4D Cell Krypton Rubberized Lantern Deals

Lumilite 4850 Z-Lite 6-Volt/4D Cell Krypton Rubberized Lantern with D-Cell Adaptor and 6 Position Stand, Grey
Customer Ratings: 4.5 stars
Buy Now
Nice light works like a flashlight. With it's strong beam up to whole a block in my neighborhood. But wide burst of light like a lantern. It's not all that heavy even with the batteries in it. It can use both D & big square volt battery. I have not tested the floating ability if dropped in water. The rubber is a little more harder & stiff. Than previous models. But over all it's a great lantern / flashlight.

Click Here For Most Helpful Customer Reviews >>

really like the adjustable handle so you can sit the flashlight down and have 2 free hands. has great distance too

Best Deals for Lumilite 4850 Z-Lite 6-Volt/4D Cell Krypton Rubberized Lantern

This flashlight is the worst, the most horrible i've ever own! not bright at all and, does not flood wide area, its more of a spotlight, a tiny little 5 inch diameter beam even with brand new batteries! The only reason why i kept it is because it's not worth sending it back for my money, it would just be a waste of time and money charged from the return shipping fee. i dont recommend this. if you're looking for something better, don't bother wasting your money here.

Honest reviews on Lumilite 4850 Z-Lite 6-Volt/4D Cell Krypton Rubberized Lantern

This is a replacement for one I bought 20 years ago. Somehow the handle got broken. I couldn't find one of the same quality in the stores. Searched online and was able to find the exact replacement.

Find helpful customer reviews and review ratings for Lumilite 4850 Z-Lite 6-Volt/4D Cell Krypton Rubberized Lantern

I purchased this light because of the ability to place it in various positions to accommodate whatever I am doing. I was pleased that you can use either a 6 volt or 4 D cell batteries to power it.

Buy Fom Amazon Now