Buy 6 inches Recess 10 Watt LED Ceiling Light with 104 LEDs and LED

Customer Ratings:

First off, I am an electrical contractor. I think these lights are great besides the fact that these cannot be dimmed!! I have also tried other 12vdc power supplies and they do not work with these particular type of LEDs that are inside. They are about 1/2" thick and most all ceiling drywall is 1/2"-5/8" thick so that means you can just cut the hole and go, regardless of where a truss or floor joist sits. And not having to lay out your can lights according to where the truss/joists are is a HUGE time saver.

They provide an evenly distributed light. I have used many of these as well as the 8" version (which is a lot brighter) but the 6" ones are bright as well. They have a 120 degree beam angle so you have a wide light coverage. If you are planning on installing these in a large room and need adequate brightness, I would suggest using the 8" ones instead. The outer bezel is silverish/gray color (similar to stainless steel) but I suspect they could be scratched up lightly with some fine grit sandpaper and painted the same color as the ceiling, but I ahve not tried that yet.

One bit of very helpful installation advice.....The power supply that comes with these have an output 12v connector that plugs directly in to a pigtail that comes out of the back of the LED light, and the 120v input on the power supply has a brown wire (HOT) and a blue wire (NEUTRAL) which is a European/Asian color configuration; different from the US black/white wiring colors for 120v but does the same thing (electricity is colorblind). You MUST install these in a junction box of some sort and use the appropriate cover for said box in order to be both SAFE and meet the guidlines of the National Electrical Code. You cannot splice your wires coming from your switch or your existing light on to the power supply input wires without being secured in a junction box. Otherwise you would have a couple wire nuts tying together loose wires just floating in your attic or ceiling space, which is not good.

I like these so much that I am recommending these to any customer of mine that wishes to install recessed lighting somewhere. I just wish that they were DIMMABLE and I would have given them all the stars I could. These lights are VERY easy to install and I probably made it sound more complicated than they really are as far as installation goes. These are about the easiest lights to install from scratch even if you are the average homeowner and not an electrician. I highly recommend these!!!

Click Here For Most Helpful Customer Reviews >>

I bought this to experient with for a lighting project. While the color of the light is very appealing, nice yellow color, it's not bright enough for a large project. I'm trying to do a single car garage and found it would take too many this size. So I decided on the 10 inch ones. However for a smaller project I do like these as you can directly power these from 120v ac.

Best Deals for 6 inches Recess 10 Watt LED Ceiling Light with 104 LEDs and LED

Based on other reviews regarding the brightness of these units, I almost ordered the larger version. I am glad that I didn't, it seems plenty bright for a fixture of this size. It was very easy to install. I followed the other reviewer's advice regarding the European color codes for the wiring.

Honest reviews on 6 inches Recess 10 Watt LED Ceiling Light with 104 LEDs and LED

Light worked great in my basement where I didnt have the room to put a standard pot light. Only thing I didnt care for is it really doesnt project a beam.

Find helpful customer reviews and review ratings for 6 inches Recess 10 Watt LED Ceiling Light with 104 LEDs and LED

This is a great solution for a tight spot. The light is warmer than 3000K. It puts out a lot of diffuse light up close, but does not produce enough to light the floor adequately from the ceiling. I returned this product because I was looking for something to use like a canned light in a spot where I only had the thickness of the drywall to install it. I ended up going with a surface mounted light instead. This is a great light for the right application--like in a closet.